Welcome Qubic Systems - 5% discount with code Qubic until 31.3.24!

Products

6 products

  • Asetek SimSports® Bottom Mount - simracer

    Asetek Asetek SimSports® Bottom Mount

    Versand nächster Werktag

    Asetek SimSports® Bottom Mount The Bottom Mount can be mounted directly to your table or rig. You mount your Asetek SimSports® Direct Drive Wheelbase by attaching the Bottom Mount to the bottom of the Wheelbase and then mounting it to your rig in the desired position.The T-slots on the bottom of the Wheelbase allow you to slide your Wheelbase back and forth on the mount. This mounting solution maximizes legroom in your setup and clears the way for comfortable and fully immersive sim racing. Dimensions: 460 x 120 x 5 mm Material: 5 mm laser cut steel Hole pattern: Wheel stand mount: 4-hole pattern (87 mm x 89 mm). Rig mount: 3-hole pattern, 4-hole pattern

    Versand nächster Werktag

    €69,80

  • Asetek Wheelbase mount with tilt

    Asetek Asetek Wheelbase mount with tilt

    Versand nächster Werktag

    Asetek SimSports Wheelbase mount with tilt Can be used as a base or side mount 10 degree tilt angle 4 mm laser cut steel

    Versand nächster Werktag

    €89,00

  • PRO SIMRIG Front Wheelbase Mount

    PRO SIMRIG PRO SIMRIG Front Wheelbase Mount

    Versand nächster Werktag

    PRO SIMRIG Front Wheelbase MountPRO SIMRIG front bracket for mounting front mounted wheelbases (typically Direct Drive).A complete kit for mounting the front bracket to the PRO SIMRIG PSR1 rig is included.The bracket is designed to provide maximum flexibility and is adjustable to accommodate more or less any position.The front mount is made of 15mm aluminum and coated in black. The side brackets are made of 10mm aluminum, black coated.The front bracket and the side brackets are mounted together with 40x80 aluminum profiles to maximize the strength and avoid any bending.The bracket supports the following types: Simucube 2 Ultimate, Pro and Sport VRS DirectForce Pro Simagic Alpha Simagic Alpha Mini Bodnar SimSteering Mige 130ST Kollmorgen AKM Lenze MCS Can also be used with other rig types. Designed for rigs with a distance of 580 mm between supports. If you have any doubts or further questions, please contact us.

    Versand nächster Werktag

    €129,00

  • PRO SIMRIG side wheelbase mount

    PRO SIMRIG PRO SIMRIG side wheelbase mount

    Versand nächster Werktag

    PRO SIMRIG side wheelbase mountBracket for side mounting your Fanatec CSL DD or DD1 or DD2.Complete kit for mounting the side mount bracket to the PSR1 rig.The bracket is built to include maximum adjustability, so it can take more or less all positions.The brackets are made of 10mm thick aluminum, coated black and are mounted with 40x80 aluminum profiles to maximize strength and avoid any bending.Brackets: always blackProfiles: BlackCan be used with other rig types. Designed for rigs with a distance of 580 mm between supports. If you have any doubts or further questions, please contact us.

    Versand nächster Werktag

    €129,00

  • PRO SIMRIG Wheelbase mount universal

    PRO SIMRIG PRO SIMRIG Wheelbase mount universal

    Versand nächster Werktag

    PRO SIMRIG Wheelbase mount universalThe bracket is suitable for mounting many different top-mounted wheelbases, such as Fanatec, Thrustmaster, Logitech, AccuForce, etc.Compatibility: Logitech Driving Force steering wheels (G29, G920). Thrustmaster steering wheels (T300 etc.) Fanatec CSW (V2.5 etc.) Fanatec DD1 (mounted below) Fanatec DD2 (bottom mounted) Fanatec CSL DD (bottom mounted) (new) SIMAGIC M10 (with SIMAGIC side mounts) Moza R16 / R21 (using Moza mounting plates) Other bottom mounted Wheelbases supplied with 90 degree brackets for bottom mounting Complete kit for mounting the bracket to the PSR1 rig. The mount is designed to provide maximum flexibility and is adjustable to take more or less any position.The brackets are made of 15mm aluminum and coated black. The side mounts are made of 10mm aluminum, black coated.Wheelbase mount and side mounts are mounted together with 40x80 aluminum extrusions to maximize strength and prevent any flexing, even when a Fanatec DD1 or DD2 is mounted on it.Can also be used with other rig types. Designed for rigs with a distance of 580 mm between supports. If you have any doubts or further questions, please contact us.

    Versand nächster Werktag

    €129,00

  • Simgrade Direct Drive Mount

    Simgrade Simgrade Direct Drive Mount

    ["~ 14 Tage / days"]

    Simgrade Direct Drive Bracket/Fixing. Compatibility: SIMUCUBE 2 Sport, Pro, Ultimate SIMUCUBE 1 and other previous generation Direct Drive motors with MiGE 130ST 20/30 Nm motors, e.g. VRS Direct Force Pro Adjustable tilt angleCan basically be mounted on any flat surfaceMounting surface: 210 mm x 40 mm (width/depth). Holes are for M8 screws and min M6 is recommended.Fits industry standard 80/20 aluminum profile when using 40Ă—80 mm specification or higherMaterial: 4mm steelMatte black

    ["~ 14 Tage / days"]

    €48,00

Login

Forgot your password?

Don't have an account yet?
Create account