PRO SIMRIG

PRO SIMRIG Monitor Stand Triple Monitor, blackPRO SIMRIG monitor stands are built to stand independently of the simulation rig.The advantage of a free-standing monitor stand (not connected to the rig itself) is that it avoids the vibrations that come from steering wheel and pedal inputs. This can be especially noticeable when using a direct-drive wheelbase.Up to 32" monitors: Light version recommended (important note: Samsung G7 32" should use the Heavy version)32.5"+ monitors: Heavy version recommended Vesa 100: includes Vesa 50/75/100 drill pattern platesVesa mounts included? YesScrews and nuts included? YesDoes your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this set (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Take a look at the adjustable feet for monitor stands hereDIMENSIONS Light: Height: 1240mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 500mm Has 40x40 horizontal bar, arms and feet Heavy: Height: 1280mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 580mm Has 40x80 horizontal bar, arms and feet Note: The monitors are for illustration purposes only

Read more less

PRO SIMRIG Monitor Stand Single Monitor from 32.5", blackPRO SIMRIG monitor stands are built to stand separately from the rig. This stand is for a single monitor.Separate monitor stands (that are not connected to the rig) avoid vibrations coming from the rig. This is especially important when using a direct drive Wheelbase.The monitor stand is flexible and can be adjusted in height and width to suit your needs.For monitors from 32" monitors: (heavy version) recommendedVesa 100: including vesa 50/75/100 drill image plateVesa mounts included? YesScrews and nuts included? YesCan I upgrade to triple monitors at a later date? YesDoes your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this kit (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Check out the adjustable feet for monitor stands hereDIMENSIONSHeight: 1280mm (post + feet)Width: 1200mm (horizontal bar)With 40x80 horizontal bar and feetNo monitor included, picture is for illustration purposes only

Read more less

PRO SIMRIG upgrade Kit Single- to Tripple-Monitorstand If you have started with a single PRO SIMRIG Monitor Stand and later want to change it to a triple Monitor Stand , you can add this add-on kit.You can choose between a light or a heavy version depending on your single monitor stand.Light = 40x40Heavy = 40x80Complete kit for mounting the upgrade kit to the single monitor stand is included. Vesa mounts, bolts and nuts also included.Have a different brand monitor stand?This kit may also fit other brands. 40x40 or 40x80 single monitor stands should allow you to upgrade to triples. Your center bar will need to be at least 100cm long for 27" screens, or 120cm long for 32" screens (120cm 40x40 and 40x80 bars are available in the DIY Parts section). If you are in any doubt whether this upgrade kit will fit your monitor stand, please contact us and we will help.

Read more less

PRO SIMRIG Top Monitor StandA PRO SIMRIG top monitor stand that can be attached to both single and triple monitor stands.A complete kit for mounting the top screen monitor stand to the single or triple monitor stands is included.Vesa mount, screws and nuts are also included (to attach the Vesa mount to the monitor stand).If you need mounting hardware for your monitor (to attach your monitor to the Vesa mount), please purchase this set (one per monitor).

Read more less

PRO SIMRIG Integrated single monitor mount for PSR1 (660mm)Extra strong and rigid thanks to the 40x80 profile that solidifies the constructionStrong aluminum side platesMinor angle adjustments on the profile without having to move the side bracketsSupplied with a VESA 50/75/100 bracketThe mount is suitable for the PRO SIMRIG PSR1 or any other aluminum profile rig where the outside of the uprights (or the inside of the uprights) is 660 mm.Supplied with screws and T-nuts to attach to your rig.

Read more less

PRO SIMRIG Integrated single monitor mount for PSR3 (650mm)Extra strong and rigid thanks to the 40x80 profile that solidifies the constructionStrong aluminum side platesMinor angle adjustments on the profile without having to move the side bracketsSupplied with a VESA 50/75/100 bracketBracket suitable for the PRO SIMRIG PSR3 or other aluminum extrusion where the outside of the uprights (or the inside of the uprights) is 650mm.Supplied with screws and T-nuts to attach to your rig.

Read more less

PRO SIMRIG Monitor Stand Single Monitor up to 32", black PRO SIMRIG monitor stands are built to stand separately from the rig. This stand is for a single monitor.Separate monitor stands (that are not connected to the rig) avoid vibrations coming from the rig. This is especially important when using a direct drive Wheelbase.The monitor stand is flexible and can be adjusted in height and width to suit your needs.Up to 32" monitors: light version recommendedVesa 100: includes vesa 50/75/100 drilling pattern plateVesa brackets included? YesScrews and nuts included? YesCan I upgrade to triple monitors at a later date? Yes Does your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this kit (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Check out the adjustable feet for monitor stands hereDIMENSIONSHeight: 1240mm (stand + feet)Width: 1200mm (horizontal bar)Has 40x40 horizontal bar and feetNo monitor included, picture is for illustration purposes only  

Read more less