Products

Sim racers and professional eSport athletes often sweat during long training sessions and races. This is not only an unpleasant feeling, but often the seating position is no longer optimal, dehydration occurs and concentration and performance drops.In the long run, sweating also leads to additional wear and tear on the seat and possibly to unpleasant odors.Our system ventilates certain areas of the chair and dissipates body heat to increase comfort and performance.Features:- High quality fiberglass structure with glossy black outer coating.- Comfortable padding for maximum comfort with excellent fit- Removable seat cushion- High level of comfort thanks to the raised back and leg restsSeat in monolithic design: Upholstered in velvet material Shell shape made of high-strength fiberglass-reinforced plastic 4 belt slots Stitched logo 4 blowers for ventilation of the back and bottom zone in combination with a special 3D fabric. This seat is NOT FIA approved and can be used for gaming purposes only.Seat mounts NOT included! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

This seat is made of fiberglass reinforced polyester and is characterized by high strength, which ensures high comfort of use.Thanks to the low position of the seat, the driver has the best position during the race in all conditions. The seat is made of black velour and offers a very sporty look and amazing comfort thanks to the removable lumbar and leg supports.Seat in monolithic construction:Upholstered in velvet materialShell shape made of high-strength fiberglass reinforced plastic4 belt slotsStitched logosNOT HOMOLOGATED FOR STREET OR RACE TRACK USE! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

The seat shifter can be used in combination with the seat holder. The width of the seat slider can be adjusted to the desired width by slightly bending the middle tie rod. This allows the seat slider to be made to fit all side-mounted bucket seats.Adjustment range of the slider: 23cm

Read more less

Steel bracket with lettering "O-Rouge

Read more less

Pimax Crystal Light VR Headset ohne Controller Produktbeschreibung Ultra-scharfe Auflösung von 2880 x 2880 pro Auge Asphärische Glaslinsen mit großem Sweet Spot 35 PPD für gestochen scharfe Sicht Variable Bildwiederholfrequenz (60Hz, 72Hz, 90Hz, 120Hz) für flüssiges Gameplay Manuell einstellbare IPD (58-72 mm) Lokale Dimmung liefert lebendige, lebensechte Farben Foveated Rendering: Feststehend 2.0. Einfache Einrichtung mit Inside-Out-Tracking oder Erweiterung mit Lighthouse-Tracking Audio: austauschbare 3,5-mm-Buchse, 2x Mikrofon. Technische Daten Typ VR-Brille Farbe schwarz Geeignet für Virtual Reality Brillenträger geeignet Ja Display Art QLED Auflösung (gesamt) 5760 x 2880 Pixel Auflösung (pro Auge) 2880 x 2880 Pixel Bildwiederholfrequenz 120 Hz Anschlüsse 1x Kopfhörer Audio Mit eingebautem Mikrofon Weitere Informationen  Mit Local Dimming | Manuelles IPD (Pupillenabstand) einstellbar von 58 bis 72 mm | 35 PPD | 6DoF Inside-Out-Tracking | Fixed Foveated Rendering 2.0 | Integriertes Audio mit 2 Mikrofonen Hinweis Nur VR-Brille, ohne Controller | Vorrausetzungen: Betriebssystem - Windows 10/ Windows 11; GPU - NVIDIA GeForce RTX 2070 und höher; CPU - Intel i5-12500/ AMD R7-3700X und höher; RAM - 16 GB und mehr; Video-Ausgang - 1x DisplayPort 1.4; 1x USB-A 3.0/3.1/3.2; 1x USB-A 2.0 und höher Zubehör vorhanden USB/DisplayPort-Kabel (5 m), Netzteil, Linsentuch Wichtiger Hinweis zum Widerrufsrecht:Der Widerruf des VR Headsets ist aus hygienischen Gründen ausgeschlossen

Read more less

PRO SIMRIG double locking Seat Slider Double-locking seat glide from PRO SIMRIG.Fits perfectly with the 4 mm steel side seat brackets (PRO SIMRIG)Content includes:1 left rail1 right rail1 size-adjustable center barAssorted fixings:4 x M8x12mm4 x M8x16mm4 x M8x20mm4 x M8x25mm4 x M8 washers4 x M8 T-nuts4 x M8 lock nuts4 x M8 nut

Read more less

PRO SIMRIG 4mm steel seat side brackets The PRO SIMRIG seat side brackets are used for mounting side-mounted seats. They are screwed to the side of the seat and either screwed directly to the PSR1/PSR3 or they can be screwed to a seat glider. 1 set contains 2 side brackets to mount for 1 seat.The side brackets can also be used for any side mounted seat with the standard 290 mm spacing between the mounting holes.The hole spacing for mounting on a seat glider fits perfectly with PRO SIMRIG seat gliders.   Note: This product does not include fixtures and fittings for attachment to a sim rig. The PRO SIMRIG PSR1/PSR3 comes standard with fixtures and fittings. If you need jigs and fittings and do not have a PSR1/PSR3, please contact us.Only suitable for sim rigs.

Read more less

PRO SIMRIG cup holderStay hydrated! Add a cup holder to your rig.A complete kit is included to mount the cup holder directly to your PSR1 rig.Can also be mounted to other rigs if a vertical slot 8 (standard 40x40 slot) is within reach.

Read more less

PRO SIMRIG floor matA high quality floor mat is an elegant way to level out small irregularities in your floor. The rig stands stable on the 6mm surfaceIf you have a very uneven surface.... you should consider the PRO SIMRIG Heavy Duty Adjustable Feet to help stabilize the rig.Features a blue PRO SIMRIG logo.Dimensions:90 x 180 cm

Read more less

PRO SIMRIG adjustable feetIf your PSR1 rig is on a very uneven floor, you can add these adjustable feet to ensure that your PSR1 rig stands level.A complete kit for mounting the feet to the PRS1 rig (or any other rig) is included.The mounts are made of 15mm thick aluminum and are coated black.The screws are M16 (extra heavy duty).If your PSR1 rig is on a reasonably level floor, we recommend the PRO SIMRIG Premium Floor Mat. The floor mat compensates for minor floor unevenness and balances the rig itself, as it is made of 6 mm medium-hard foam.Compatibility:PRO SIMRIG PSR1Other 40mm profile rigs

Read more less

PRO SIMRIG Front Wheelbase MountPRO SIMRIG front bracket for mounting front mounted wheelbases (typically Direct Drive).A complete kit for mounting the front bracket to the PRO SIMRIG PSR1 rig is included.The bracket is designed to provide maximum flexibility and is adjustable to accommodate more or less any position.The front mount is made of 15mm aluminum and coated in black. The side brackets are made of 10mm aluminum, black coated.The front bracket and the side brackets are mounted together with 40x80 aluminum profiles to maximize the strength and avoid any bending.The bracket supports the following types: Simagic Alpha U / Simagic Alpha / Simagic Mini+ Simucube 2 Sport / Pro / Ultimate Fanatec CSL DD / DD Pro (with optional Boost Kit) / CSW.  Fanatec Clubsport DD and DD+ Fanatec DD1 / DD2 Moza R5 - requires “R5 40mm to 66mm 4-hole adapter plate” from Moza Moza R9 / Moza R12 / Moza R16 / R21 All Thrustmaster / Logitech VRS Direct Force Pro All Asetek - requires Asetek Floor Mount, combined with the PSR1 Misc. mount, or take the PSR1 No Wheel Bracket option and use the Asetek Side Mount + many more Can also be used with other rig types. Designed for rigs with a distance of 580 mm between supports. If you have any doubts or further questions, please contact us.

Read more less

PRO SIMRIG Integrated single monitor mount for PSR1 (660mm)Extra strong and rigid thanks to the 40x80 profile that solidifies the constructionStrong aluminum side platesMinor angle adjustments on the profile without having to move the side bracketsSupplied with a VESA 50/75/100 bracketThe mount is suitable for the PRO SIMRIG PSR1 or any other aluminum profile rig where the outside of the uprights (or the inside of the uprights) is 660 mm.Supplied with screws and T-nuts to attach to your rig.

Read more less