GSI Gomez

13 products

  • GSI Gomez Hyper SL Steering Wheel

    GSI Gomez GSI Gomez Hyper SL Steering Wheel

    ["Build to order 6-10 Wochen"]

    GSI Gomez Hyper SL Steering Wheel 6.5 Ncm rotary encoder 3 seven-way multi-switches 3 + 12 + 3 RGB LED turret lights " CEMS N52" V3 switch 5 backlit RGB LED push-button rotary encoders with 5-way functionality Standard "HSE" double clutches (6-paddle configuration available) 12 RGB LED pushbuttons (500 gram actuation force) Spec 3" spiral cable 72 assignable inputs 86 addressable RGB LEDs in total 6061 aluminum components with 300 mm diameter Direct injection molded silicone grips 70mm threaded stud pattern 5mm carbon fiber front panel Aluminum unibody housing

    ["Build to order 6-10 Wochen"]

    €1.449,00 - €1.739,00

  • GSI Gomez Gloves AeroFlex Shorty

    GSI Gomez GSI Gomez Gloves AeroFlex Shorty

    ["6-8 Wochen"]

    GSI Gomez Gloves AeroFlex ShortyExperience superior breathability, grip and comfort during the race with GSI AeroFlex Gloves. Made from lightweight and breathable poly-spandex material, these gloves feature a grippy silicone surface on the palms and fingers for improved control. And thanks to touchscreen compatibility for GSI wheels, you'll always stay connected (cell phones not supported). Boost your performance with the AeroFlex gloves!Sizing Tip:Due to the flexible nature of the GSI AeroFlex gloves, you should choose one size smaller for a particularly good fit.

    ["6-8 Wochen"]

    €72,00

  • GSI Gomez AH100 Hub

    GSI Gomez GSI Gomez AH100 Hub

    ["6-8 Wochen"]

    GSI Gomez AH100 HubThe GSI AH100 hub is the latest addition to the GSI product range. Like all GSI products, this hub has an uncompromising level of design, quality and strength. It extends the shaft by 100mm and is made from 6061 aluminum for maximum strength and reliability. This shaft extension not only looks good, it handles well too.Each side uses a 70mm PCD (Pitch Circle Diameter). One side has all threaded holes, while the other side has all unthreaded holes, allowing for a wide range of wheel and base connections. The AH100 models are anodized in blue, gold, black, red, purple and lime green.*Each hub is supplied with six M5 x 12mm bolts for mounting.

    ["6-8 Wochen"]

    €170,00

  • GSI Gomez AH50 Hub

    GSI Gomez GSI Gomez AH50 Hub

    ["6-8 Wochen"]

    GSI Gomez AH50 Hub The GSI AH50 hub extension is the perfect addition to your GSI steering wheel. It extends the shaft by 50mm. Each side uses a 70mm bolt pattern that connects directly to all DD bases on the market. One side is threaded and the other side is unthreaded, allowing for any combination of connections to steering wheels and bases. Made from billet 6061 aluminum with gold, black, red, purple, green and blue anodized models.*Each hub comes with six M5 x 12mm bolts for mounting.

    ["6-8 Wochen"]

    €84,00

  • GSI Gomez QRS-1 Quick Release Adapter Kit

    GSI Gomez GSI Gomez QRS-1 Quick Release Adapter Kit

    ["6-8 Wochen"]

    GSI Gomez QRS-1 Quick Release Adapter Kit The GSI QRS-1 stands out in the world of sim racing for its motorsport-grade quality and high standards. It features an industry-unique adjustable tolerance system that ensures a zero-backlash connection that increases both confidence and performance. Constructed from a combination of 7075 and 6061 aluminum, the QRS-1 is both strong and precise, offering durability and a high level of craftsmanship. These materials were chosen for their balance of strength and light weight, making them suitable for both simulation racing and real world motorsport applications.The GSI QRS-1 fits all wheels with a bolt circle diameter of 70 mm, making it suitable for a wide range of racing setups, from IRL to SIM environments. The 68mm length and compatibility with 6 x 70mm PCD configurations allows for easy installation and increases the appeal for sim racers looking for a reliable and high quality racing experience.*Please note that the QRS-1 is a true motorsport quick release with 95% of the mechanism integrated on the steering wheel side. Therefore, we do not offer the steering wheel side and the base side as separate items. The reason for this is that selling them separately would not provide any practical benefit, including any noticeable improvement or cost saving.

    ["6-8 Wochen"]

    €239,00

  • GSI Gomez SC2-X Adapter

    GSI Gomez GSI Gomez SC2-X Adapter

    ["6-8 Wochen"]

    GSI Gomez SC2-X AdapterThe GSI SC2-X Adapter is an advanced solution for Simucube users who want to equip their rig with their favorite hub, extension or quick release. With a thickness of 25 mm, a diameter of 95 mm and a weight of only 0.30 kg, this adapter offers a slim and compact design that fits seamlessly into your setup.In addition, the GSI SC2-X adapter is compatible with two of the most commonly used mounting patterns: 6x 50.8mm and 6x 70mm. This compatibility ensures that it can be integrated with a variety of hubs, extensions or quick releases that have one of these mounting patterns.With the GSI SC2-X adapter, you can customize your Simucube setup exactly as you want it, giving you an even more personalized and immersive racing simulation experience. The adapter's compact and lightweight design makes it a practical and stylish addition to your sim rig, while its precise construction and attention to detail ensure a secure and stable connection for your hub, extension or quick release.

    ["6-8 Wochen"]

    €45,00

  • GSI Gomez USB Spec 3 Coiled Cable

    GSI Gomez GSI Gomez USB Spec 3 Coiled Cable

    ["6-8 Wochen"]

    GSI Gomez USB Spec 3 Coiled CableThe GSI Spec 3 coiled cable for USB2 is a rugged and sturdy cable designed specifically for the racing simulator and features a full metal connector. Unlike any other cable on the sim racing market, the GSI Spec-3 features a custom urethane inner mold that completely encloses every solder joint, leaving no weak spots or exposed wires. Combined with a bolted voltage relief and an inaccessible Loctite coupling, this cable is second to none. Ferrite core 686 mm uncoiled length. 22 AWG power conductors 28 AWG tinned copper wire 28 AWG twisted signaling pair Inner shield Aluminum metallized polyester - end to end Outer shield 65% braided tinned copper braid

    ["6-8 Wochen"]

    €0,00

  • GSI Gomez Captive Screw Set

    GSI Gomez GSI Gomez Captive Screw Set

    ["~ 6-8 Wochen"]

    GSI Gomez Captive Screw SetGSI captive screws are made specifically for sim racers to properly connect quick releases, extension hubs and threaded component adapters. They are made of high quality 12.9 carbon steel black with custom 360 Loctite for maximum hold and strength. With an 8mm smooth shaft and 5mm thread, they are suitable for most sim racing equipment. Common applications include mounting Fanatec Podium Hub and other threaded QRs to the threaded body of a GSI. They are sold in sets of 6 captive screws and can be used with any sim racing wheel or hub in general.

    ["~ 6-8 Wochen"]

    €17,00

  • GSI Gomez AreoFlex Gloves

    GSI Gomez GSI Gomez AreoFlex Gloves

    ["6-8 Wochen"]

    GSI Gomez AreoFlex GlovesExperience superior breathability, grip and comfort during the race with GSI AeroFlex Gloves. Made from lightweight and breathable poly-spandex material, these gloves feature a grippy silicone surface on the palms and fingers for improved control. And thanks to touchscreen compatibility for GSI wheels, you'll always stay connected (cell phones not supported). Boost your performance with the AeroFlex gloves!SIZE TIP:Due to the flexible nature of GSI AeroFlex gloves, size down for an extra snug fit.Size chart Size Hand circumference (CM) Hand circumference (inches) S 20.3 - 21.6 8 - 8½ M 21.6 - 22.9 8½ - 9 L 22.9 - 24.1 9 - 9½ XL 24.1 - 25.4 9½ - 10

    ["6-8 Wochen"]

    €79,00

  • GSI Gomez Wheel X-29

    GSI Gomez GSI Gomez Wheel X-29

    ["build to order (6-8 Wochen)"]

    GSI Gomez Wheel X-29The X-29 is GSI's entry-level steering wheel that offers excellent value for money and is packed with features to take your racing simulation experience to the next level. The combination of high quality materials, intuitive controls and precise construction make it the ultimate accessory for those who take their racing simulation seriously. 10 momentary RGB LED buttons (500 gram actuation force) 3 push-button rotary encoders 2 seven-way multi-switches Laser-marked wheel functions "CEMS N52" V3 shift lever Dual clutches (optional) 6061 aluminum construction Direct injection molded silicone grips 290mm wheel diameter 70mm threaded bolt pattern Scope of delivery: X-29 wheel GSI "Spec 3" coiled USB cable the rear hub is not included in the scope of delivery!

    ["build to order (6-8 Wochen)"]

    €698,00 - €949,00

  • GSI Gomez Wheel GT-MAX 32

    GSI Gomez GSI Gomez Wheel GT-MAX 32

    ["build to order (6-8 Wochen)"]

    GSI Gomez Wheel GT-MAX 32The GT-MAX32 takes everything we've learned and raises it to a new technological level, including features, construction and assembly. The GT-MAX32 is the first racing simulation steering wheel made from a continuous molded carbon footprint. The front and outer circular rim are made from a single carbon fiber unit with silicone overmolded grips for maximum grip and strength while reducing weight.PLEASE NOTEThis product is made from the finest hand-braided carbon fiber to ensure its strength and durability. The unique carbon weave may have slight variations and there may be small areas of carbon filler that contribute to the unique character of the product. 5" high-resolution LCD touch screen 3 seven-way multi-switches 4+ 16+ 4 RGB LED Rev Lights "CEMS N52" V3 switch lever 5 backlit RGB LED push-button rotary encoders with 5-way functionality "HSE" dual clutches (optional) Directly injected silicone grips "Spec 3" spiral cable 6061 aluminum components 320 mm diameter 8 momentary RGB LED push buttons (500 g force) 70 mm threaded stud pattern One-piece carbon fiber front panel Aluminum unibody chassis 2.00 kg minimum weight (2 paddles) 2.12 kg maximum weight (4 paddles) Scope of delivery GT-MAX32 steering wheel GSI "Spec 3" coiled USB cable AH100 hub not included.

    ["build to order (6-8 Wochen)"]

    €1.487,00 - €1.739,00

  • GSI Gomez Hyper P1

    GSI Gomez GSI Gomez Hyper P1

    ["built to order (6-8 Wochen)"]

    GSI Gomez Hyper P1The Hyper P1 is the culmination of everything the racing simulator community has asked of GSI and more. With a strong design language focused on motorsports, we have not only focused on functionality, but also on building a steering wheel that has earned the top spot in our product lineup. A product that exudes first-class quality in material and construction at every turn. A true "halo" product for the discerning sim racer. High-resolution 4.3" LCD touchscreen 3 seven-way multi-switches 3 + 14 + 3 RGB LED turret lights "CEMS N52" V3 shift lever 5 backlit RGB LED push-button rotary encoders with 5-way functionality Standard "HSE" double clutches (6-paddle configuration available) 12 momentary RGB LED pushbuttons (500 gram actuation force) "Spec 3" spiral cable 72 assignable inputs 88 addressable RGB LEDs in total 6061 aluminum components 300 mm diameter Direct injection molded silicone grips 70mm threaded stud pattern 5mm carbon fiber front panel Aluminum unibody body 1.68 kg minimum weight (4 paddles) 1.85 kg maximum weight (6 paddles) Scope of delivery: Hyper P1 GSI "Spec 3" coiled USB cable Attention: QRS-1 not included.

    ["built to order (6-8 Wochen)"]

    €1.777,00 - €2.029,00

GSI Gomez

Login

Forgot your password?

Don't have an account yet?
Create account