Seats

Steel bracket with lettering "O-Rouge

Read more less

The seat shifter can be used in combination with the seat holder. The width of the seat slider can be adjusted to the desired width by slightly bending the middle tie rod. This allows the seat slider to be made to fit all side-mounted bucket seats.Adjustment range of the slider: 23cm

Read more less

Sim racers and professional eSport athletes often sweat during long training sessions and races. This is not only an unpleasant feeling, but often the seating position is no longer optimal, dehydration occurs and concentration and performance drops.In the long run, sweating also leads to additional wear and tear on the seat and possibly to unpleasant odors.Our system ventilates certain areas of the chair and dissipates body heat to increase comfort and performance.Features:- High quality fiberglass structure with glossy black outer      coating.- Comfortable padding for maximum comfort with excellent fit- Removable seat cushion- High level of comfort thanks to the raised back and leg restsSeat in monolithic construction: Padded in velvet material Shell shape made of high strength fiberglass reinforced plastic 4 belt slots Stitched logo 4 blowers to ventilate the back and bottom zone in combination with a special 3D fabric. This seat is NOT FIA approved and can be used for gaming purposes onlySeat mounts NOT included! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

PRO SIMRIG 4mm steel seat side brackets The PRO SIMRIG seat side brackets are used for mounting side-mounted seats. They are screwed to the side of the seat and either screwed directly to the PSR1/PSR3 or they can be screwed to a seat glider. 1 set contains 2 side brackets to mount for 1 seat.The side brackets can also be used for any side mounted seat with the standard 290 mm spacing between the mounting holes.The hole spacing for mounting on a seat glider fits perfectly with PRO SIMRIG seat gliders.   Note: This product does not include fixtures and fittings for attachment to a sim rig. The PRO SIMRIG PSR1/PSR3 comes standard with fixtures and fittings. If you need jigs and fittings and do not have a PSR1/PSR3, please contact us.Only suitable for sim rigs.

Read more less

This seat is made of reinforced polyester - glass, is characterized by high strength, ensuring thus a comfortable use.Thanks to the low seating position, the driver has the best seating position during the race in all conditions. The seat is made of black velor and offers a very sporty look and amazing comfort thanks to the removable lumbar and leg rests.Seat in monolithic construction:- Upholstered in velvet material- Shell shape made of high-strength glass fiber reinforced plastic- 4 belt slots- Stitched logoNOT HOMOLOGATED FOR STREET OR RACE TRACK USE! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

Sim racers and professional eSport athletes often sweat during long training sessions and races. This is not only an unpleasant feeling, but often the seating position is no longer optimal, dehydration occurs and concentration and performance drops.In the long run, sweating also leads to additional wear and tear on the seat and possibly to unpleasant odors.Our system ventilates certain areas of the chair and dissipates body heat to increase comfort and performance.Features:- High quality fiberglass structure with glossy black outer coating.- Comfortable padding for maximum comfort with excellent fit- Removable seat cushion- High level of comfort thanks to the raised back and leg restsSeat in monolithic design: Upholstered in velvet material Shell shape made of high-strength fiberglass-reinforced plastic 4 belt slots Stitched logo 4 blowers for ventilation of the back and bottom zone in combination with a special 3D fabric. This seat is NOT FIA approved and can be used for gaming purposes only.Seat mounts NOT included! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

PRO SIMRIG  double locking Seat Slider Doppelt verriegelnder Sitzgleiter von PRO SIMRIG. Passt perfekt zu den seitlichen Sitzhalterungen aus 4mm Stahl (PRO SIMRIG)Enthaltener Inhalt:1 Linke Schiene1 Rechte Schiene1 größenverstellbare MittelstangeAssortierte Befestigungen:4 x M8x12mm4 x M8x16mm4 x M8x20mm4 x M8x25mm4 x M8 Unterlegscheiben4 x M8 T-Nutensteine4 x M8 Sicherungsmutter4 x M8 Mutter

Read more less

  O-Rouge Sitz C1 Cold Fusion XL mit EU Steckernetzteil Das ideale Angebot für diejenigen, die einen bequemen Rennsitz in modernem Design mit aggressivem Aussehen und höchster Leistung suchen! Dieser Sitz hat eine belüftete Rücken- und Bodenzone und leitet heiße Luft von Ihrem Körper ab.- 4 Gebläse zur Belüftung der Rücken- und Bodenzone kombiniert mit einem speziellen 3D-GewebeSitz nur verwendbar für Gaming!Sitz Stütze nicht einbegriffen. Du willst den Sitz in Aktion ausprobieren, dann schau mal bei Tango-Racing in Wien vorbei: Bevor Sie den Sitz bestellen, achten Sie bitte auf Folgendes:Rennsitze sind schmaler als normale Sitze!Wir berechnen eine Bearbeitungsgebühr von 20% für die Rückgabe des Sitzes.

Read more less

PRO SIMRIG Seat XL Nordschleife by Cobra Motorsport Extra large (XL) sim racing seat Designed for larger drivers Steel construction with solid back for maximum strength Breathable fabric High quality materials and workmanship Made especially for larger drivers!Sim racers come in all shapes and sizes. This seat is suitable for drivers who are either taller, wider in the middle or wider at the shoulders (or a combination of these 3 factors).The Nordschleife is generous in all proportions without losing the benefits of a fixed rear seat.Before this seat, taller drivers really only had 2 options. 1) buy a really expensive seat that accommodates XL sizes, 2) use an adjustable "armchair" seat, or 3) retrofit a car seat.None of these options offer what most sim racers are looking for: a sturdy seat with a firm back at an affordable price that doesn't compromise on performance. This is where the PRO SIMRIG Nordschleife XL sim racing seat from Cobra Motorsport comes into play. Tested by tall riders: 190cmTested by tall riders: 127cm waist (at belt height)Tested by wide riders: (very wide in the shoulder area)NOT HOMOLOGATED FOR STREET OR RACE TRACK USE! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

This seat is made of fiberglass reinforced polyester and is characterized by high strength, which ensures high comfort of use.Thanks to the low position of the seat, the driver has the best position during the race in all conditions. The seat is made of black velour and offers a very sporty look and amazing comfort thanks to the removable lumbar and leg supports.Seat in monolithic construction:Upholstered in velvet materialShell shape made of high-strength fiberglass reinforced plastic4 belt slotsStitched logosNOT HOMOLOGATED FOR STREET OR RACE TRACK USE! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less