
Rigs & Seats
O-Rouge O-Rouge steel seat brackets, left+right
Steel bracket with lettering "O-Rouge
€58,00
PRO SIMRIG PRO SIMRIG Monitor Stand Single Monitor from 32.5", black
PRO SIMRIG Monitor Stand Single Monitor from 32.5", blackPRO SIMRIG monitor stands are built to stand separately from the rig. This stand is for a single monitor.Separate monitor stands (that are not connected to the rig) avoid vibrations coming from the rig. This is especially important when using a direct drive Wheelbase.The monitor stand is flexible and can be adjusted in height and width to suit your needs.For monitors from 32" monitors: (heavy version) recommendedVesa 100: including vesa 50/75/100 drill image plateVesa mounts included? YesScrews and nuts included? YesCan I upgrade to triple monitors at a later date? YesDoes your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this kit (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Check out the adjustable feet for monitor stands hereDIMENSIONSHeight: 1280mm (post + feet)Width: 1200mm (horizontal bar)With 40x80 horizontal bar and feetNo monitor included, picture is for illustration purposes only
€238,00
PRO SIMRIG PRO SIMRIG Monitor VESA Mounting Bolt and Spacer Kit
PRO SIMRIG Monitor VESA Mounting Bolt and Spacer KitThis kit is suitable for PRO SIMRIG VESA mounts and most common monitor setups.It is becoming more common for monitors to have a deep recess where the standard monitor mount sits. This looks great and makes for a nice flush finish, but it does mean that it can be difficult to fit aftermarket VESA mounts.With this kit, you can screw through the PRO SIMRIG VESA mounts, overcome most notches with the 8mm spacer, and bolt it to the back of the monitor.Kit includes:4 x M4 16mm screw4 x M4 8mm brass spacers1 Set required per Vesa mount/monitor (i.e. if you have a triple monitor stand, order 3 sets).*Please note: While we have found this combination to work well for most monitors we have dealt with, not every monitor is the same and different screws and spacers may be required to attach your monitor to the VESA mount. If you need help with this, please contact us.
€4,80
PRO SIMRIG PRO SIMRIG Monitor Stand Triple Monitor, black
PRO SIMRIG Monitor Stand Triple Monitor, blackPRO SIMRIG monitor stands are built to stand independently of the simulation rig.The advantage of a free-standing monitor stand (not connected to the rig itself) is that it avoids the vibrations that come from steering wheel and pedal inputs. This can be especially noticeable when using a direct-drive wheelbase.Up to 32" monitors: Light version recommended (important note: Samsung G7 32" should use the Heavy version)32.5"+ monitors: Heavy version recommended Vesa 100: includes Vesa 50/75/100 drill pattern platesVesa mounts included? YesScrews and nuts included? YesDoes your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this set (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Take a look at the adjustable feet for monitor stands hereDIMENSIONS Light: Height: 1240mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 500mm Has 40x40 horizontal bar, arms and feet Heavy: Height: 1280mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 580mm Has 40x80 horizontal bar, arms and feet Note: The monitors are for illustration purposes only
€279,00 - €387,00
O-Rouge O-Rouge Seatslider
The seat shifter can be used in combination with the seat holder. The width of the seat slider can be adjusted to the desired width by slightly bending the middle tie rod. This allows the seat slider to be made to fit all side-mounted bucket seats.Adjustment range of the slider: 23cm
€59,90
O-Rouge O-Rouge seat C1 Cold Fusion with EU plug-in power supply unit
Sim racers and professional eSport athletes often sweat during long training sessions and races. This is not only an unpleasant feeling, but often the seating position is no longer optimal, dehydration occurs and concentration and performance drops.In the long run, sweating also leads to additional wear and tear on the seat and possibly to unpleasant odors.Our system ventilates certain areas of the chair and dissipates body heat to increase comfort and performance.Features:- High quality fiberglass structure with glossy black outer coating.- Comfortable padding for maximum comfort with excellent fit- Removable seat cushion- High level of comfort thanks to the raised back and leg restsSeat in monolithic construction: Padded in velvet material Shell shape made of high strength fiberglass reinforced plastic 4 belt slots Stitched logo 4 blowers to ventilate the back and bottom zone in combination with a special 3D fabric. This seat is NOT FIA approved and can be used for gaming purposes onlySeat mounts NOT included! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.
€749,00
PRO SIMRIG PRO SIMRIG upgrade Kit Single- to Tripple-Monitorstand
PRO SIMRIG upgrade Kit Single- to Tripple-Monitorstand If you have started with a single PRO SIMRIG Monitor Stand and later want to change it to a triple Monitor Stand , you can add this add-on kit.You can choose between a light or a heavy version depending on your single monitor stand.Light = 40x40Heavy = 40x80Complete kit for mounting the upgrade kit to the single monitor stand is included. Vesa mounts, bolts and nuts also included.Have a different brand monitor stand?This kit may also fit other brands. 40x40 or 40x80 single monitor stands should allow you to upgrade to triples. Your center bar will need to be at least 100cm long for 27" screens, or 120cm long for 32" screens (120cm 40x40 and 40x80 bars are available in the DIY Parts section). If you are in any doubt whether this upgrade kit will fit your monitor stand, please contact us and we will help.
€125,00 - €149,00
PRO SIMRIG PRO SIMRIG Seat XL Nordschleife by Cobra Motorsport
PRO SIMRIG Seat XL Nordschleife by Cobra Motorsport Extra large (XL) sim racing seat Designed for larger drivers Steel construction with solid back for maximum strength Breathable fabric High quality materials and workmanship Made especially for larger drivers!Sim racers come in all shapes and sizes. This seat is suitable for drivers who are either taller, wider in the middle or wider at the shoulders (or a combination of these 3 factors).The Nordschleife is generous in all proportions without losing the benefits of a fixed rear seat.Before this seat, taller drivers really only had 2 options. 1) buy a really expensive seat that accommodates XL sizes, 2) use an adjustable "armchair" seat, or 3) retrofit a car seat.None of these options offer what most sim racers are looking for: a sturdy seat with a firm back at an affordable price that doesn't compromise on performance. This is where the PRO SIMRIG Nordschleife XL sim racing seat from Cobra Motorsport comes into play. Tested by tall riders: 190cmTested by tall riders: 127cm waist (at belt height)Tested by wide riders: (very wide in the shoulder area) Outside to outside of shoulder 560mm Inside to inside of back section (without shoulders) 346mm Height from base to top of head rest 885mm Width across base of seat (at the back) 360mm Width across base of seat (at the front) 385mm (without padding compression) Back to front measurement (before the thigh roll) 340mm NOT HOMOLOGATED FOR STREET OR RACE TRACK USE! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.
€489,00
PRO SIMRIG PRO SIMRIG Monitor Stand Single Monitor up to 32", black
PRO SIMRIG Monitor Stand Single Monitor up to 32", black PRO SIMRIG monitor stands are built to stand separately from the rig. This stand is for a single monitor.Separate monitor stands (that are not connected to the rig) avoid vibrations coming from the rig. This is especially important when using a direct drive Wheelbase.The monitor stand is flexible and can be adjusted in height and width to suit your needs.Up to 32" monitors: light version recommendedVesa 100: includes vesa 50/75/100 drilling pattern plateVesa brackets included? YesScrews and nuts included? YesCan I upgrade to triple monitors at a later date? Yes Does your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this kit (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Check out the adjustable feet for monitor stands hereDIMENSIONSHeight: 1240mm (stand + feet)Width: 1200mm (horizontal bar)Has 40x40 horizontal bar and feetNo monitor included, picture is for illustration purposes only
€189,00
O-Rouge O-Rouge seat C1 Cold Fusion XL with EU plug-in power supply
O-Rouge seat C1 Cold Fusion XL with EU plug-in power supplyThe ideal offer for those looking for a comfortable racing seat in a modern design with an aggressive look and top performance! This seat has a ventilated back and bottom zone and directs hot air away from your body.- 4 fans to ventilate the back and bottom zone combined with a special 3D fabricSeat can only be used for gaming!Seat support not included.You want to try out the seat in action, then drop by Tango-Racing in Vienna:Before you order the seat, please note the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.
€819,00
Nitro Concepts Nitro Concepts R300 Bucket Seat
Nitro Concepts R300 Bucket Seat The Nitro Concepts R300 Bucket Seat stands for ultimate comfort and durability in sim racing and marks the brand's entry into dedicated racing seats. With a lightweight fiberglass shell and premium materials, the R300 combines outstanding support with a stylish, race-inspired design. Whether you're riding a long race session or just a short lap, the R300 offers you an ergonomic design and robust construction that lets you fully immerse yourself in the racing action. High-quality materials for endless racing fun without compromise Lightweight and extremely robust - perfect for intense racing action Universally compatible for unlimited driving fun on any track Maximum comfort, even during long hours of racing sessions Nitro Concepts R300 bucket seat - race-inspired premium design The Nitro Concepts R300 bucket seat has a sleek, race-inspired design that gives your sim rig a professional look. The striking lines and sporty aesthetics not only enhance the visual impact of your setup, but also reflect the focus on performance and style. This seat makes you feel like you're in a real racing car - for an even more thrilling racing experience. High-quality materials for maximum comfort Made from the same high-quality materials as the Nitro Concepts gaming chairs, the R300 bucket seat offers long-lasting comfort and support. The high-density foam padding provides a soft yet firm seating experience. This combination ensures that you are comfortable and can concentrate fully even during long racing sessions. Ergonomically optimized for maximum support and comfort The R300 has been designed according to ergonomic principles to provide optimum support. With its contoured sides and supportive backrest, fatigue is reduced and your concentration remains high even during intense racing sessions. So you can ride with maximum precision and control. Lightweight and robust fiberglass construction The lightweight fiberglass shell of the R300 ensures durability and resistance. The seat retains its shape and performance even with frequent use. This robust construction ensures that the seat will provide reliable comfort for sim racers of all levels for a long time. Seamless compatibility with sim rigs The Nitro Concepts R300 is designed to easily integrate with the Nitro Concepts E-Racer using the Seat Holder. Its universal mounting design ensures quick and easy installation so you can get started right away Dimensions: 47.5 x 60 x 98 cm (L x W x H) Weight: 10.4 kg Color: Black Material: Glass fiber, PU foam, metal, velour Body height: 155 - 210 cm Maximum body weight: 120 kg Compatibility: E-Racer and other racing rigs Color Main color black Dimensions / measurements weight 10,4 kg Chair specifications Backrest height 98 cm Outer seat width, widest point 60 cm Max. total height 98 cm Maximum load 120 kg min. recommended body height 155 cm max. recommended body height 210 cm Material Main material Seat cover fabric Seat material cold foam Base material plastic, steel
€279,90
PRO SIMRIG PRO SIMRIG Top Monitor Stand
PRO SIMRIG Top Monitor StandA PRO SIMRIG top monitor stand that can be attached to both single and triple monitor stands.A complete kit for mounting the top screen monitor stand to the single or triple monitor stands is included.Vesa mount, screws and nuts are also included (to attach the Vesa mount to the monitor stand).If you need mounting hardware for your monitor (to attach your monitor to the Vesa mount), please purchase this set (one per monitor).
€109,00
