Simrig
Simrig Simrig SR2 Motion System
Simrig SR2 Motion System The SIMRIG SR2 is a powerful motion system. Equipped with industrial grade motors, a redesigned ECU and a more powerful power supply, the SIMRIG SR2 is a professional device. All devices are developed, built and tested by SIMRIG in Sweden. The SIMRIG SR2 can move a total load of 225 kg. This is 50 kg more than the smaller version (SR1).Despite its power and accuracy, its footprint is small. The actuators are mounted directly to your rig. The control unit fits easily under your seat. The power supply can be stowed next to the computer. The SIMRIG SR2 enhances your rig without making it too big. The motion system is accompanied by SIMRIG Control Center at no additional cost or subscription fee. The software interprets the movement of the simulated vehicle and uses this data to move your rig accordingly. It supports all major simulation titles. The installation is plug-and-play. Connect the actuators, the ECU, the power supply and the emergency stop switch. Connect a few cables. Install the software. Then you are ready to go! Scope of delivery:- 4x SIMRIG SR2 linear actuator- 1x SIMRIG SR2 control unit- 1x 1000W power supply (100-240V)- 1x emergency stop- 4x linear actuator cable (1m)- 1x EU power cable (C13)- 1x USB cable (3m)- 1x Low voltage power cable (2m)- 1x SIMRIG Control Center (Key for download)- assorted screws and T-nuts
€4.090,00 - €4.280,00
Simrig Simrig SR1 Motion System
Simrig SR1 motion systemThe SIMRIG SR1 has been sold to all corners of the world since 2018. All units are designed, built and tested by SIMRIG in Sweden.The SIMRIG SR1 is designed for maximum immersion and ease of use. With its small footprint, it can be mounted on your existing rig made of aluminum profiles. The electronic control unit is small enough to mount under your seat. It connects directly to your computer via USB. The power supply works with 100-240 V mains voltage.For the best performance, durability and user experience, the maximum load is set at 175 kg. The maximum load includes the rig, the driver, other peripherals and additional weight moved by the SIMRIG SR1 motion system.The system has three degrees of freedom (3-DOF): pitch, roll and heave. With pitch and roll, the system can simulate acceleration, braking and cornering. It can also follow the track geometry, for example by leaning forward when driving downhill. With Heave, the system can push the rig upwards when you hit kerbs and bumps in the road.The SIMRIG SR1 is accompanied by SIMRIG Control Center. This software controls the motion system by interpreting the position and acceleration of the simulated vehicle. It supports all major simulation titles.A complete motion system: 4x SIMRIG SR1 linear actuator 1x SIMRIG SR1 ECU 1x 500W power supply (100-240 V at 50-60 Hz) 1x emergency stop switch 4x cable for linear drive (1m) 1x power cable for ECU (2m) 1x power cable (C13) 1x USB cable (3m) 1x SIMRIG Control Center (download) Various screws and T-slots And mounting brackets for your selected rig: 4x SIMRIG SR1 bracket 4x aluminum profile 780x20x20 mm 4x aluminum angle brackets 4x profile cover Various screws and T-slots
€3.380,00 - €3.530,00
Simrig Simrig SR3 motion system
Simrig SR3 motion system The SIMRIG SR3 has come to life by the means of continuous improvement and customer feedback. Many of it's very best design features have been carried back to the SIMRIG SR1 and SR2.What sets the SIMRIG SR3 apart is its ability to handle a substantial load capacity. Responding to the community's request for a system that can support heavier setups, the SIMRIG SR3 boasts a total load capacity of 250 kg. This significant improvement opens up new possibilities for users to customize their rigs with heavier seats, additional peripherals, and more, without compromising on performance.Installation of the SIMRIG SR3 is a straightforward, plug-and-play process, designed to get you up and racing with minimal downtime. The package includes everything needed for a complete setup: actuators, the ECU, a power supply, and all necessary cables and hardware. It also comes with the SIMRIG Control Center software, which is the interface through which users can customize their motion feedback to match each vehicle's unique characteristics across all major simulation titles.MountingThe SIMRIG SR3 is compatible with most aluminium extrusion rigs. We provide off-the-shelf solutions for the most common sizes: 80x40, 120x40, 160x40 mm, and others on request.With the introduction of the SIMRIG SR3 we are also adding a new mounting system: the EasyBracket. It is now possible to mount the actuators directly to the sides of an aluminium extrusion rig. The EasyBracket comes pre-attached to the actuator, allowing for easy and quick installation.All actuator cables are now black, making them easier to hide under the rig.PerformanceAt its core, the SIMRIG SR3 is powered by industrial-grade motors, ensuring robustness and longevity. The system can actuate up to 250 kg. This includes the rig, the driver, and peripherals. The necessary power is seamlessly supplied by a fan-less 1000 W power supply; that connects to a normal household wall socket.Despite its powerful performance, the SIMRIG SR3 maintains a compact footprint. The actuators are designed to attach directly to your rig, while the ECU is compact enough to fit neatly under your seat. The power supply can be conveniently placed next to your computer, ensuring that the SIMRIG SR3 enhances your racing setup without imposing on your space.The SIMRIG SR3 is not just about raw performance; it's about enhancing the user experience. It comes with the SIMRIG Control Center software, which is optimized to remove undue latency. The system latency is negligible at only 7 milliseconds.
€4.660,00 - €4.860,00