Products

PRO SIMRIG side wheelbase mountBracket for side mounting your Fanatec CSL DD or DD1 or DD2.Complete kit for mounting the side mount bracket to the PSR1 rig.The bracket is built to include maximum adjustability, so it can take more or less all positions.The brackets are made of 10mm thick aluminum, coated black and are mounted with 40x80 aluminum profiles to maximize strength and avoid any bending.Brackets: always blackProfiles: BlackCan be used with other rig types. Designed for rigs with a distance of 580 mm between supports. If you have any doubts or further questions, please contact us.

Read more less

PRO SIMRIG Seat XL Nordschleife by Cobra Motorsport Extra large (XL) sim racing seat Designed for larger drivers Steel construction with solid back for maximum strength Breathable fabric High quality materials and workmanship Made especially for larger drivers!Sim racers come in all shapes and sizes. This seat is suitable for drivers who are either taller, wider in the middle or wider at the shoulders (or a combination of these 3 factors).The Nordschleife is generous in all proportions without losing the benefits of a fixed rear seat.Before this seat, taller drivers really only had 2 options. 1) buy a really expensive seat that accommodates XL sizes, 2) use an adjustable "armchair" seat, or 3) retrofit a car seat.None of these options offer what most sim racers are looking for: a sturdy seat with a firm back at an affordable price that doesn't compromise on performance. This is where the PRO SIMRIG Nordschleife XL sim racing seat from Cobra Motorsport comes into play. Tested by tall riders: 190cmTested by tall riders: 127cm waist (at belt height)Tested by wide riders: (very wide in the shoulder area) Outside to outside of shoulder 560mm Inside to inside of back section (without shoulders) 346mm Height from base to top of head rest 885mm Width across base of seat (at the back) 360mm Width across base of seat (at the front) 385mm (without padding compression) Back to front measurement (before the thigh roll) 340mm NOT HOMOLOGATED FOR STREET OR RACE TRACK USE! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

PRO SIMRIG Slot-In cable clamps 10-packThese cable clamps have the advantage of sliding easily into the aluminum profile (they fit all PRO SIMRIG profiles and other Series 40 Slot 8 profiles). See photos of how they slide into the profile and then twist. Can be used in the vertical position as it fits snugly in the slot.The two-sided cable clamp can be opened and reused with different cables on each side.It has a rubber band inside to secure the cables and a clip on each arm to secure and keep them neat.No glue required.Made of durable black nylon 66 material.Color: BlackPrice is per pack of 10 clips

Read more less

PRO SIMRIG Slotcover 5mFlexible slot covers for aluminum profilesEasy to slide inAvailable colors: black white red blue yellow orange green 5m lengthSuitable for 40x40 Profinut 8For aesthetic purposes or to keep dust out of the ducts!Easy to cut with scissors or craft knife (be careful!)

Read more less

PRO SIMRIG Keyboard Tray Fully adjustable keyboard tray.Complete kit for direct mounting on PSR1 or other aluminum extrusion rig (40 profile) is included.Keyboard tray is made of 4mm thick black coated aluminum.Compatibility: PRO SIMRIG PSR1 Other 40mm profile rigs

Read more less

PRO SIMRIG Top Monitor StandA PRO SIMRIG top monitor stand that can be attached to both single and triple monitor stands.A complete kit for mounting the top screen monitor stand to the single or triple monitor stands is included.Vesa mount, screws and nuts are also included (to attach the Vesa mount to the monitor stand).If you need mounting hardware for your monitor (to attach your monitor to the Vesa mount), please purchase this set (one per monitor).

Read more less

PRO SIMRIG Under TrayAn under tray for the side mount of the PSR1, PSR3 or any other aluminum profile rig. This is useful for storing your phone or other items without cluttering up your mouse compartment!A complete mounting kit for the Under Tray is included (3 x M6x16mm screws & 3 x M6x20mm screws & 3 x M6 T-nuts). You have two different screw lengths depending on whether you are mounting the PRO SIMRIG Mouse Tray or the PRO SIMRIG Mini Tray, or just the Under Tray alone.The tray is made of 4 mm thick aluminum and powder-coated in black.Dimensions (flat deck): 250 x 185 x 4 mmCompatibility: PRO SIMRIG PSR1 / PSR3 PRO SIMRIG mouse tray PRO SIMRIG mini tray Suitable for mounting on other aluminum profile rigs. Photos show other parts/accessories. This offer is only valid for the Under Tray.

Read more less

PRO SIMRIG Universal Heel Rest This universal heel support from PRO SIMRIG is a useful addition for any setup where the pedals are not supplied with a special base plate, or if you need to bolt your pedals to an aluminum profile.

Read more less

PRO SIMRIG Universal HolderThe Universal Holder is an inexpensive, versatile holder that can be used for a variety of things, including (but not limited to!): Button bar mount Headphone holder Steering wheel mount Webcam mount Bracket for key light Pre-drilled with M8 holes at both ends and 3 holes in the center for attaching attachments that need to be permanently mounted.Supplied as standard with 2 x M8 bolts, 2 x M8 washers and 2 x M8 slot nuts.Manufactured from 3mm thick carbon steel, powder coated in matt black.Dimensions: Inner length (distance between both ends) 130mm. Width (widest point) 80mm Width (narrowest point) 40mm Note: Profile, headphones and webcam are not included.

Read more less

PRO SIMRIG upgrade Kit Single- to Triple-Monitorstand If you have started with a single PRO SIMRIG Monitor Stand and later want to change it to a triple Monitor Stand , you can add this add-on kit.You can choose between a light or a heavy version depending on your single monitor stand.Light = 40x40Heavy = 40x80Complete kit for mounting the upgrade kit to the single monitor stand is included. Vesa mounts, bolts and nuts also included.Have a different brand monitor stand?This kit may also fit other brands. 40x40 or 40x80 single monitor stands should allow you to upgrade to triples. Your center bar will need to be at least 100cm long for 27" screens, or 120cm long for 32" screens (120cm 40x40 and 40x80 bars are available in the DIY Parts section). If you are in any doubt whether this upgrade kit will fit your monitor stand, please contact us and we will help.

Read more less

PRO SIMRIG adjustable feet for monitor standIf you have an uneven floor, these adjustable feet can be added to level the monitor stand.A complete kit for mounting the feet to the monitor stand is included. The brackets are made of 10 mm thick black coated aluminum. The main bolts are M12 (12mm).The price is for a complete set of monitor stand feet. 4 feet, 4 brackets, screws, T-nuts and nuts.

Read more less

PRO SIMRIG Wheelbase mount universalThe bracket is suitable for mounting many different top-mounted wheelbases, such as Fanatec, Thrustmaster, Logitech, AccuForce, etc.Compatibility: Logitech Driving Force steering wheels (G29, G920). Thrustmaster steering wheels (T300 etc.) Fanatec CSW (V2.5 etc.) Fanatec DD1 (mounted below) Fanatec DD2 (bottom mounted) Fanatec CSL DD (bottom mounted) (new) SIMAGIC M10 (with SIMAGIC side mounts) Moza R16 / R21 (using Moza mounting plates) Other bottom mounted Wheelbases supplied with 90 degree brackets for bottom mounting Complete kit for mounting the bracket to the PSR1 rig. The mount is designed to provide maximum flexibility and is adjustable to take more or less any position.The brackets are made of 15mm aluminum and coated black. The side mounts are made of 10mm aluminum, black coated.Wheelbase mount and side mounts are mounted together with 40x80 aluminum extrusions to maximize strength and prevent any flexing, even when a Fanatec DD1 or DD2 is mounted on it.Can also be used with other rig types. Designed for rigs with a distance of 580 mm between supports. If you have any doubts or further questions, please contact us.

Read more less