Products

 CHARACTERISTICS: Set consists of gas, brake & clutch Billet aluminum with black anodized finish Load cell signal measurement in all pedals (brake: 200 kg) Brake pedal max force from foot: 110 kg Special elastomer in the brake pedal ensures extremely progressive feel and long service life Ball bearings and spherical rod ends in all pivot points: Extremely smooth pedal feeling Silent operation No maintenance or lubrication needed Zero lateral play and extremely rigid Super fast and easy adjustment of the pedal feel without tools Cable length per pedal 35 cm: free positioning from pedal to pedal for optimal ergonomics Calibration software with: adjustable dead zones non-linear response curves Function to save to file and load from file Compact design: 24mm across x 80mm lengthwise. Can be mounted directly to Aluminum profile (40x80 or higher). Mounting with M6 (included) or M5 screws. Pedal can be tilted +/- 8.5 degrees 5 years warranty (2 years commercial) Designed, manufactured and assembled 100% in Finland Video Review by Dan SuzukiSimGrade Thera Review | A super smooth and high quality pedal set - YouTube

Read more less

Simgrade VX-PRO Brake Kit V1 Alternative brake kit for VX-PRO pedals.Two softer springs (compared to the standard yellow springs).Red: mediumBlue: softNew side platesThe available load positions (four) are different from the standard plates, see last product pictureThe red line represents the stock side plate, the black line represents the Brake Kit V1 version, this design allows additional brake configurations to perfectly match the rider's preferences.The top position is higher than the stock plates, creating a "maxxed-out" stiffness configuration (with the yellow spring).The supplied springs can be used with both the stock side plates and the new side plates with the yellow (standard) spring.

Read more less

Simgrade VX-Pro Gas & Bremse (Throttle & Brake), 2 Pedale Set Pedale mit einem nie dagewesenen Preis-Leistungs-Verhältnis. Die VX-PRO Pedale sind das Ergebnis von drei Jahren Entwicklung und beinhalten einige Features der Simgrade R7 und Thera Modelle.Extrem breite und einfache Einstellmöglichkeiten für den Bremswiderstand in Kombination mit der frei und unabhängig einstellbaren "Dual Stage"-Funktionalität garantieren ein perfekt auf Sie zugeschnittenes Bremsgefühl - das Ergebnis ist volles Vertrauen auch in den schwierigsten Bremszonen.Die originalgetreue Reaktion des Gaspedals sorgt für perfekte Kontrolle am Kurvenausgang, und wenn Sie die Kontrollgenauigkeit maximieren möchten, sollten Sie sich unsere kippbare Fersenstütze ansehen. Auch die Seitenstütze ist sehr zu empfehlen. ALLGEMEINE MERKMALE Ultimatives Preis-/Leistungsverhältnis Kraftmesszellen für alle Pedale (Bremse: 200kg) Große und glatte Pedalflächen für hohen Komfort Kugellager aus rostfreiem Stahl in allen Drehpunkten Einstellbarer Abstand von Pedal zu Pedal, schmale Basisausführung Wartungsfreies Design (Wägezellen, abgedichtete Lager): Staub hat keinen Einfluss auf die Leistung Supersteife Struktur, kein Spiel in jeder Richtung Höhenverstellbare Pedalflächen Einfache und schnelle Einstellung der Pedalprogression bei allen Pedalen Pedalwinkel um 8,5 Grad einstellbar Kalibrierungssoftware mit einstellbaren Totzonen Nicht-lineare Ansprechkurven Speichern in einer Datei und Laden von Profilen aus einer Datei Kompatibel mit Pedal Base Plate und Heel Stopper Montagemuster: Klicken Sie hier, um das Bild zu sehen Kompatibel mit ISO 10243 Die-Federn Kompatibel mit Konsolen über Drive Hub! Extra Info für PS5: hier Entwickelt, hergestellt und montiert 100% in Finnland Garantie: zwei Jahre Gaspedal (Throttle) Ultraweiches und präzises Gefühl Kein Metall-auf-Metall-Kontakt Federweg einstellbar Seitliche Fußstütze (optional, auch mit Bremse und Kupplung kompatibel) Integrierte Dual-Action-Fersenstütze verfügbar (optional, auch mit Bremse und Kupplung kompatibel) Drei verschiedene mechanische Einstellungen für Progressivität Bremse (Break) 200kg Kraftmesszelle, 90kg maximale Bremskraft vom Fuß Einstellbares 2-Stufen-Bremsgefühl Vier verschiedene mechanische Einstellungen für Progressivität

Read more less

Simgrade VX-Pro Gas, Bremse & Kupplung (Throttle, Brake & Clutch), 3 Pedale Set Pedale mit einem nie dagewesenen Preis-Leistungs-Verhältnis. Die VX-PRO Pedale sind das Ergebnis von drei Jahren Entwicklung und beinhalten einige Features der Simgrade R7 und Thera Modelle.Extrem breite und einfache Einstellmöglichkeiten für den Bremswiderstand in Kombination mit der frei und unabhängig einstellbaren "Dual Stage"-Funktionalität garantieren ein perfekt auf Sie zugeschnittenes Bremsgefühl - das Ergebnis ist volles Vertrauen auch in den schwierigsten Bremszonen.Die originalgetreue Reaktion des Gaspedals sorgt für perfekte Kontrolle am Kurvenausgang, und wenn Sie die Kontrollgenauigkeit maximieren möchten, sollten Sie sich unsere kippbare Fersenstütze ansehen. Auch die Seitenstütze ist sehr zu empfehlen. Die unvorhergesehene mechanische Struktur des Kupplungspedals ermöglicht die völlig freie Gestaltung von Ansprechprofilen - das Ergebnis ist die beste Kupplung, die wir je benutzt haben. Der Widerstand lässt sich in Sekundenschnelle von Straßenwagen- auf Rennwagen-Feeling einstellen. ALLGEMEINE MERKMALE Ultimatives Preis-/Leistungsverhältnis Kraftmesszellen für alle Pedale (Bremse: 200kg) Große und glatte Pedalflächen für hohen Komfort Kugellager aus rostfreiem Stahl in allen Drehpunkten Einstellbarer Abstand von Pedal zu Pedal, schmale Basisausführung Wartungsfreies Design (Wägezellen, abgedichtete Lager): Staub hat keinen Einfluss auf die Leistung Supersteife Struktur, kein Spiel in jeder Richtung Höhenverstellbare Pedalflächen Einfache und schnelle Einstellung der Pedalprogression bei allen Pedalen Pedalwinkel um 8,5 Grad einstellbar Kalibrierungssoftware mit einstellbaren Totzonen Nicht-lineare Ansprechkurven Speichern in einer Datei und Laden von Profilen aus einer Datei Kompatibel mit Pedal Base Plate und Heel Stopper Montagemuster: Klicken Sie hier, um das Bild zu sehen Kompatibel mit ISO 10243 Die-Federn Kompatibel mit Konsolen über Drive Hub! Extra Info für PS5: hier Entwickelt, hergestellt und montiert 100% in Finnland Garantie: zwei Jahre Gaspedal (Throttle) Ultraweiches und präzises Gefühl Kein Metall-auf-Metall-Kontakt Federweg einstellbar Seitliche Fußstütze (optional, auch mit Bremse und Kupplung kompatibel) Integrierte Dual-Action-Fersenstütze verfügbar (optional, auch mit Bremse und Kupplung kompatibel) Drei verschiedene mechanische Einstellungen für Progressivität Bremse (Break) 200kg Kraftmesszelle, 90kg maximale Bremskraft vom Fuß Einstellbares 2-Stufen-Bremsgefühl Vier verschiedene mechanische Einstellungen für Progressivität Kupplung (Clutch) Einstellbares Gefühl (zwei verschiedene Profilplatten enthalten) Zwei verschiedene mechanische Einstellungen für Progressivität

Read more less

Simgrade VX-Pro clutch pedal Adjustable feel (two different profile plates included) Two different mechanical settings for progressivity

Read more less

simracer.at gift voucher With gift vouchers from simracer.at, you can give a simracer the perfect gift. The recipient can choose the product themselves and you are not spoiled for choice.

Read more less

Simrig SR1 motion systemThe SIMRIG SR1 has been sold to all corners of the world since 2018. All units are designed, built and tested by SIMRIG in Sweden.The SIMRIG SR1 is designed for maximum immersion and ease of use. With its small footprint, it can be mounted on your existing rig made of aluminum profiles. The electronic control unit is small enough to mount under your seat. It connects directly to your computer via USB. The power supply works with 100-240 V mains voltage.For the best performance, durability and user experience, the maximum load is set at 175 kg. The maximum load includes the rig, the driver, other peripherals and additional weight moved by the SIMRIG SR1 motion system.The system has three degrees of freedom (3-DOF): pitch, roll and heave. With pitch and roll, the system can simulate acceleration, braking and cornering. It can also follow the track geometry, for example by leaning forward when driving downhill. With Heave, the system can push the rig upwards when you hit kerbs and bumps in the road.The SIMRIG SR1 is accompanied by SIMRIG Control Center. This software controls the motion system by interpreting the position and acceleration of the simulated vehicle. It supports all major simulation titles.A complete motion system: 4x SIMRIG SR1 linear actuator 1x SIMRIG SR1 ECU 1x 500W power supply (100-240 V at 50-60 Hz) 1x emergency stop switch 4x cable for linear drive (1m) 1x power cable for ECU (2m) 1x power cable (C13) 1x USB cable (3m) 1x SIMRIG Control Center (download) Various screws and T-slots And mounting brackets for your selected rig: 4x SIMRIG SR1 bracket 4x aluminum profile 780x20x20 mm 4x aluminum angle brackets 4x profile cover Various screws and T-slots

Read more less

Simrig SR2 Motion System The SIMRIG SR2 is a powerful motion system. Equipped with industrial grade motors, a redesigned ECU and a more powerful power supply, the SIMRIG SR2 is a professional device. All devices are developed, built and tested by SIMRIG in Sweden. The SIMRIG SR2 can move a total load of 225 kg. This is 50 kg more than the smaller version (SR1).Despite its power and accuracy, its footprint is small. The actuators are mounted directly to your rig. The control unit fits easily under your seat. The power supply can be stowed next to the computer. The SIMRIG SR2 enhances your rig without making it too big. The motion system is accompanied by SIMRIG Control Center at no additional cost or subscription fee. The software interprets the movement of the simulated vehicle and uses this data to move your rig accordingly. It supports all major simulation titles. The installation is plug-and-play. Connect the actuators, the ECU, the power supply and the emergency stop switch. Connect a few cables. Install the software. Then you are ready to go! Scope of delivery:- 4x SIMRIG SR2 linear actuator- 1x SIMRIG SR2 control unit- 1x 1000W power supply (100-240V)- 1x emergency stop- 4x linear actuator cable (1m)- 1x EU power cable (C13)- 1x USB cable (3m)- 1x Low voltage power cable (2m)- 1x SIMRIG Control Center (Key for download)- assorted screws and T-nuts

Read more less

Simrig SR3 motion system The SIMRIG SR3 has come to life by the means of continuous improvement and customer feedback. Many of it's very best design features have been carried back to the SIMRIG SR1 and SR2.What sets the SIMRIG SR3 apart is its ability to handle a substantial load capacity. Responding to the community's request for a system that can support heavier setups, the SIMRIG SR3 boasts a total load capacity of 250 kg. This significant improvement opens up new possibilities for users to customize their rigs with heavier seats, additional peripherals, and more, without compromising on performance.Installation of the SIMRIG SR3 is a straightforward, plug-and-play process, designed to get you up and racing with minimal downtime. The package includes everything needed for a complete setup: actuators, the ECU, a power supply, and all necessary cables and hardware. It also comes with the SIMRIG Control Center software, which is the interface through which users can customize their motion feedback to match each vehicle's unique characteristics across all major simulation titles.MountingThe SIMRIG SR3 is compatible with most aluminium extrusion rigs. We provide off-the-shelf solutions for the most common sizes: 80x40, 120x40, 160x40 mm, and others on request.With the introduction of the SIMRIG SR3 we are also adding a new mounting system: the EasyBracket. It is now possible to mount the actuators directly to the sides of an aluminium extrusion rig. The EasyBracket comes pre-attached to the actuator, allowing for easy and quick installation.All actuator cables are now black, making them easier to hide under the rig.PerformanceAt its core, the SIMRIG SR3 is powered by industrial-grade motors, ensuring robustness and longevity. The system can actuate up to 250 kg. This includes the rig, the driver, and peripherals. The necessary power is seamlessly supplied by a fan-less 1000 W power supply; that connects to a normal household wall socket.Despite its powerful performance, the SIMRIG SR3 maintains a compact footprint. The actuators are designed to attach directly to your rig, while the ECU is compact enough to fit neatly under your seat. The power supply can be conveniently placed next to your computer, ensuring that the SIMRIG SR3 enhances your racing setup without imposing on your space.The SIMRIG SR3 is not just about raw performance; it's about enhancing the user experience. It comes with the SIMRIG Control Center software, which is optimized to remove undue latency. The system latency is negligible at only 7 milliseconds.

Read more less

SimuCube 2 Quick Release Wheel Side PRECISELY MANUFACTURED - NO PLAYThe SimuCube Quick Release, which is made entirely of metal, guarantees zero play and trouble-free operation even under heavy use. The SQR's design enables precise guidance and perfect engagement. Pins preloaded by springs ensure that this experience is also guaranteed in the long term.Allows an easy and extremely stable connection of standard steering wheels with 70mm and 50.8mm bolt circle to the SC2 Quick Releases.SUPPLY Quick Release Wheel side (50,8mm) 30mm Wheel Spacer 70mm adapter Bolts and snap rings VIRTUALLY NO WEAR PARTSLike other SimCube products, the SQR was designed for maximum performance. As the only wear part, the spring mechanism of the pins was made from standard parts to make replacement as user-friendly as possible.

Read more less

Simucube Active Pedal with Force FeedbackThe Simucube Active Pedal is an inventive sim pedal that takes your sim racing experience to a new level. The Active Pedal system introduces innovative technology to improve the realism and precision of your pedal inputs.With force feedback features, the Simucube Active Pedal offers immensely fast responsiveness so you can feel every moment of the virtual road under your feet. The system dynamically adjusts the pedal resistance to your game, enabling a realistic simulation of braking and throttle forces.Focus on user-friendlinessTailor the active pedal system to your preferences with customizable settings so you can tailor the force feedback and responsiveness to your driving style.Designed for smooth integration, the Simucube Active Pedal is easy to install and compatible with a wide range of sim racing setups. This makes for a straightforward experience for beginners and experienced drivers alike. Dimensions: 100 x 250 x 402 mm (W x H x D) Scope of delivery: Simucube ActivePedal Power supply unit (country-specific cable) SC-Link USB cable Ethernet RJ45 cable (connection between SC-Link and ActivePedal) Mounting screws Torx Allen key Quick start guide Sticker Material: Metal, plastic Weight: 6 kg Color: black, orange

Read more less

Simucube Baseplate The Simucube Baseplate was developed to offer a way to combine the Simucube ActivePedal with the Simucube Throttle Pedal or other pedal units from third-party manufacturers. The high-quality mount is extremely stable, but also has an adjustable heel support to ensure appropriate ergonomics.General information Baseplate for mounting the Simucube ActivePedal Compatible with SC Throttle and other pedals from third-party manufacturers Sturdy design, high-quality workmanship Individually adjustable heel support Weight 4.2 kg Dimensions 391 x 566 x 65 mm 5-year warranty Compatibility: Compatible with: SC ActivePedal, SC Throttle, Heusinkveld Ultimate+, Simtrecs ProPedal GT, Meca CUP 1, VRS DirectForce Pro Pedals Scope of delivery:: Baseplate

Read more less