Products

Simagic С-P1000 ClutchClutch pedal for P1000 pedals of all modifications

Read more less

Simagic С-P2000 Kupplung Kupplungspedal für P2000-Pedale aller Modifikationen

Read more less

Simgrade Direct Drive Bracket/Fixing. Compatibility: SIMUCUBE 2 Sport, Pro, Ultimate SIMUCUBE 1 and other previous generation Direct Drive motors with MiGE 130ST 20/30 Nm motors, e.g. VRS Direct Force Pro Adjustable tilt angleCan basically be mounted on any flat surfaceMounting surface: 210 mm x 40 mm (width/depth). Holes are for M8 screws and min M6 is recommended.Fits industry standard 80/20 aluminum profile when using 40×80 mm specification or higherMaterial: 4mm steelMatte black

Read more less

Stable adjustable heel stop Steel with 3 mm thickness Matt black surface Dimensions: see product picture Fastening with M6 (or smaller) screws. M6 screws included. Compatible with pedal base plate

Read more less

Ideal for Thera pedals, can also be used with other pedals Includes mounting screws M5 and T-nuts M5 for mounting on the aluminum profile Can also be mounted on any flat surface Black powder finish of the surface Width 386 mm

Read more less

Simgrade kippbare Fersenstütze für VX-PRO Pedale Unterstützt die Ferse des Fahrers über den gesamten Pedalweg, so dass Sie Ihren Fuß während des Rennens nicht mehr umpositionieren müssen.Darüber hinaus ist das Gleiten der Fußsohle entlang der Pedalfläche effektiv in der Geschichte.Kurz gesagt, dieses brillante Kit bringt Komfort und Eingabegenauigkeit auf ein ganz neues Niveau!Kompatibel mit allen VX-PRO Pedalen; Gas, Bremse und Kupplung.

Read more less

Stable base plate for pedals Out of the box compatible with Thera and R7 pedals Can also be used as a universal base plate Compatible with heel stop Dimensions: see product picture Aluminum with 8mm thickness Matt black surface (fine textured powder coating) Width 386 mm | Length 286 mm Distance of mounting holes (lateral) 362 mm Recommended mounting screws: M8 or M6 (M8 included)

Read more less

Simgrade R7 Advanced Brake Kit 2.0 Optionaler Bremsensatz für R7-Pedale (Spec C) Lieferumfang:: Zwei Schubstangenpakete (siehe Pfeile im Hauptbild) Alle erforderlichen Schrauben, Muttern und Unterlegscheiben für die Montage des Kits an R7 Spec C-Pedalen Mit diesem Bremsen-Kit können Sie die R7-Pedale noch weiter auf Ihre Bedürfnisse abstimmen  

Read more less

CHARACTERISTICS: Rugged stainless steel construction Convenient dual pedal control and feed accuracy due to double acting pedal arm design Clutch comes with an optional spring Heel can move up/down with foot, resulting in excellent pedal control and feed accuracy Fully adjustable pedal surfaces and heel supports for optimal pedal feel and ergonomics Load cell in all pedals for throttle, brake and clutch Silent operation due to the use of ball bearings and spherical rod ends Maintenance-free: no lubrication required Installation pattern (click to open): 87 mm (lateral) x 80 mm (longitudinal) ⇒ Can be mounted directly on aluminum profiles (minimum 40×120 mm) Adjustable pedal tilt angle +8 / -16 degrees. Super easy and quick adjustment of pedal travel, pedal feel and required actuation force Adjustable max. compression for each polyurethane spring in 1 mm steps 12 bit resolution Calibration software with adjustable dead zones Nonlinear response curves Save to file and load from file for profiles Double shielded USB cable Can be mounted directly to an industry standard 80/20 aluminum profile (min. 40×120 mm or 2 separate profiles) Designed, manufactured and assembled in Finland 🇫🇮. Warranty: 2 years

Read more less

CHARACTERISTICS: Rugged stainless steel construction Virtually double pedal control and feed accuracy due to double action pedal arm design The heel can move up/down with the foot, resulting in excellent pedal control and advance accuracy Fully adjustable pedal surfaces and heel supports for optimal pedal feel and ergonomics Load cell in all pedals for throttle, brake and clutch Brake: 200 kg load cell / maximum load through the foot: 100 kg Silent operation due to the use of ball bearings and spherical rod ends Maintenance free: no lubrication required Installation pattern (click to open): 87 mm (lateral) x 80 mm (longitudinal) ⇒ Can be mounted directly on aluminum profiles (minimum 40×120 mm) Adjustable pedal tilt angle +8 / -16 degrees. Super easy and quick adjustment of pedal travel, pedal feel and required actuation force Adjustable max. compression for each polyurethane spring in 1 mm increments Adjustable brake travel limiter (does not limit load, only travel) 12 bit resolution Calibration software with adjustable dead zones Non-linear response curves Save to file and load from file for profiles Pedal-to-controller box cable lengths: Brake 35 cm, Throttle 25 cm Double shielded USB cable Controller box equipped with mounting holes (M4) Can be mounted directly to an industry standard 80/20 aluminum profile (min. 40×120 mm or 2 separate profiles) Designed, manufactured and assembled in Finland 🇫🇮. Warranty: 2 years   INCLUDING: Controller box + USB cable Polyurethane elastomers: 4 x L=15 mm (installed) | 5 x L=10 mm 1 x steel spring L=51 mm Grounding cable (use only if necessary) Grip strap for brake pedal 4x M6 T-nut (for fastening to aluminum profile) for each pedal + 4x M6-16 screws + washers 2x M4 T-nut for controller box + M4-25 screws Additional washers  

Read more less

CHARACTERISTICS: Rugged stainless steel construction Virtually double pedal control and feed accuracy due to double action pedal arm design Heel can move up/down with the foot, resulting in excellent pedal control and advance accuracy Fully adjustable pedal surfaces and heel supports for optimal pedal feel and ergonomics Load cell in all pedals for throttle, brake and clutch Brake: 200 kg load cell / maximum load through the foot: 100 kg Silent operation due to the use of ball bearings and spherical rod ends Maintenance free: no lubrication required Installation pattern (click to open): 87 mm (lateral) x 80 mm (longitudinal) ⇒ Can be mounted directly on aluminum profiles (minimum 40×120 mm) Adjustable pedal tilt angle +8 / -16 degrees. Super easy and quick adjustment of pedal travel, pedal feel and required actuation force Adjustable max. compression for each polyurethane spring in 1 mm increments Adjustable brake travel limiter (does not limit load, only travel) 12 bit resolution Calibration software with adjustable dead zones Non-linear response curves Save to file and load from file for profiles Pedal-to-controller box cable lengths: Brake 35 cm, Throttle 25 cm Double shielded USB cable Controller box equipped with mounting holes (M4) Can be mounted directly to an industry standard 80/20 aluminum profile (min. 40×120 mm or 2 separate profiles) Designed, manufactured and assembled in Finland Warranty: 2 years INCLUDING: Controller box + USB cable Polyurethane elastomers: 4 x L=15 mm (installed) | 5 x L=10 mm 1 x steel spring L=51 mm Grounding cable (use only if necessary) Grip strap for brake pedal 4x M6 T-nut (for fastening to aluminum profile) for each pedal + 4x M6-16 screws + washers 2x M4 T-nut for controller box + M4-25 screws Additional washers Clutch is supplied with an optional spring

Read more less

Simgrade Side Support für VX-Pro Pedale Verhindert das seitliche Abrutschen des Fußes, was zu weniger Ermüdung und mehr Komfort führt.Das Fahren wird entspannter, was wiederum die Beständigkeit und Leistung steigert, insbesondere bei langen Stints.Material: 2 mm rostfreier Stahl. Kompatibel mit allen VX-PRO-Pedalen.

Read more less