Welcome Qubic Systems - 5% discount with code Qubic until 31.3.24!

Products

271 products

  • PRO SIMRIG Monitor VESA Mounting Bolt and Spacer Kit

    PRO SIMRIG PRO SIMRIG Monitor VESA Mounting Bolt and Spacer Kit

    Versand nächster Werktag

    PRO SIMRIG Monitor VESA Mounting Bolt and Spacer KitThis kit is suitable for PRO SIMRIG VESA mounts and most common monitor setups.It is becoming more common for monitors to have a deep recess where the standard monitor mount sits. This looks great and makes for a nice flush finish, but it does mean that it can be difficult to fit aftermarket VESA mounts.With this kit, you can screw through the PRO SIMRIG VESA mounts, overcome most notches with the 8mm spacer, and bolt it to the back of the monitor.Kit includes:4 x M4 16mm screw4 x M4 8mm brass spacers1 Set required per Vesa mount/monitor (i.e. if you have a triple monitor stand, order 3 sets).*Please note: While we have found this combination to work well for most monitors we have dealt with, not every monitor is the same and different screws and spacers may be required to attach your monitor to the VESA mount. If you need help with this, please contact us.

    Versand nächster Werktag

    €4,80

  • PRO SIMRIG PC Stand

    PRO SIMRIG PRO SIMRIG PC Stand

    Versand nächster Werktag

    PRO SIMRIG PC StandPRO SIMRIG PC Stand for direct mounting on the PRO SIMRIG PSR1 Rig.Complete kit for mounting the PC stand on the PSR1 rig is included.A 22mm thick laminated board is included (66x25cm).The two main advantages of the PC stand are: Utilizing the space behind the monitors that you normally never use. Also, you can use shorter cables from the PC to the monitors, Wheelbase, etc.Compatibility:PRO SIMRIG PSR1Other 40mm profile rigs

    Versand nächster Werktag

    €159,00

  • PRO SIMRIG PSR1 & PSR3 bottom mounted pedals mounting kit

    PRO SIMRIG PRO SIMRIG PSR1 & PSR3 bottom mounted pedals mounting kit

    ["4-6 Wochen"]

    PRO SIMRIG PSR1 & PSR3 bottom mounted pedals mounting kit This kit is required for bottom-mounted pedals, e.g. for the Thrustmaster T-LCM. It is suitable for both the PRO SIMRIG PSR1 and the PRO SIMRIG PSR3.Contains: 4 x 40x40 Angle Brackets (Black) 4 x M8 T-slot nut 4 x M8x16 mm cap screw 4 x M6x16 mm button head screw 4 x M6x20 mm button head screw

    ["4-6 Wochen"]

    €10,90

  • PRO SIMRIG PSR1 black base

    PRO SIMRIG PRO SIMRIG PSR1 black base

    Versand nächster Werktag

    PRO SIMRIG PSR1 black baseThe PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a base rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base section, seat rails, a vertical section, a wheelbase section (wheelbase bracket not included) and a pedal section with adjustable pedal plate.All parts like angles, screws, nuts etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.

    Versand nächster Werktag

    €689,00

  • PRO SIMRIG PSR1 black with front wheelbase mount

    PRO SIMRIG PRO SIMRIG PSR1 black with front wheelbase mount

    Versand nächster Werktag

    PRO SIMRIG PSR1 black with front wheelbase mountThe PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a base rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base section, seat rails, a vertical section, a wheelbase section, the front wheelbase posture and a pedal section with adjustable pedal plate.All parts such as brackets, screws, nuts, etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.Supported Wheelbases: Simucube 2 Sport/Pro/Ultimate VRS DirectForce Pro Simagic Alpha Simagic Alpha Mini Bodnar SimSteering Mige 130ST Kollmorgen AKM Lenze MCS Other front mounted wheelbases

    Versand nächster Werktag

    €818,00

  • PRO SIMRIG PSR1 black with side wheelbase mount (DD1,DD2)

    PRO SIMRIG PRO SIMRIG PSR1 black with side wheelbase mount (DD1,DD2)

    Versand nächster Werktag

    PRO SIMRIG PSR1 black with side wheelbase mount (DD1,DD2)The PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a basic rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base section, seat rails, a vertical section, a wheelbase section, the side wheelbase posture and a pedal section with adjustable pedal plate.All parts such as brackets, screws, nuts, etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.Supported Wheelbases: Fanatec DD1 Fanatec DD2 Fanatec CSL DD Fanatec DD Pro CSL DD/DD Pro/DD1/DD2 Bracket

    Versand nächster Werktag

    €818,00

  • PRO SIMRIG PSR1 black with Wheelbase mount universal

    PRO SIMRIG PRO SIMRIG PSR1 black with Wheelbase mount universal

    Versand nächster Werktag

    PRO SIMRIG PSR1 black with Wheelbase mount universalThe PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a basic rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base part, seat rails, a vertical part, a wheelbase part, the universal wheelbase posture and a pedal part with adjustable pedal plate.All parts such as brackets, screws, nuts, etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.Supported Wheelbases: Logitech Driving Force wheels (G29, G920) Thrustmaster steering wheels (T300 etc.) Fanatec CSW (V2.5 etc.) Fanatec DD1 (mounted below) Fanatec DD2 (bottom mounted) Fanatec CSL DD (bottom mounted) Fanatec DD Pro (bottom mounted) SIMAGIC M10 (with SIMAGIC side mounts) Moza R9 / R16 / R21 (using Moza mounting plates - the 4-to-3 hole adapter) Other Wheelbases that mount from the bottom, or that come with 90-degree brackets that allow mounting from the bottom

    Versand nächster Werktag

    €818,00

  • PRO SIMRIG PSR3 black

    PRO SIMRIG PRO SIMRIG PSR3 black

    Versand nächster Werktag

    PRO SIMRIG PSR3 blackNot all rigs are created equal. The thought process behind the PSR3 was "how do we squeeze this much stiffness out of a value-oriented cockpit without losing adjustability".The PSR3 is blessed with the same heavy-duty profiles used on the PSR1. Significantly thicker sidewalls provide more mass, more weight and more stiffness than the competition.On the steering knuckles, the steering area is overlapped. This requires more material and costs more, but the result is better anchoring of the steering wheel deck, which is supported by the rig perimeter.As with the PSR1, the wheelbase section is designed to be extremely strong. A 10mm thick aluminum wheel deck is used, connected to profiled and adjustable side plates.The PSR3 has a great pedal section. The design is an evolution of the PSR1, where two 10mm aluminum plates enclose two 80mm profiles mounted with 8 direct mounts. Many riders prefer a very stiff brake setup, and so the PSR3 had to be built with those requirements in mind. Other designs often suffer from flex in the pedal area, primarily due to cost savings in materials and design. BRACED SIDE MOUNT INCLUDED AS STANDARD In keeping with the motto "overlap = strength," the PSR3 features a braced side mount. This reduces lateral movement when shift levers or hand brakes are attached to the side mount. To help you find the perfect height, two different mounting heights allow for 80mm adjustment in 1mm increments. The side mount comes with 1 x 40x80x490mm profile and 1 x 40x40x350mm profile. The side mount can be attached to either the left or right side of the PSR3 cockpit. PSR3 comes standard with an externally braced side mount. PSR3 is designed for the new generation of Direct Drive wheelbases. Compatibility with many wheelbasesThe PSR3 wheel deck was built with mid-range direct drive wheelbases in mind (we consider wheelbases like the Fanatec CSL DD (with boost kit) and Simagic Alpha Mini to be "mid-range" direct drive wheelbases).They are extremely popular due to their mix of price, performance, and strength. The PSR3 was designed specifically for these vehicles.The PSR3 can also handle stronger direct drive motors like Fanatec DD1 and DD2, Simucube 2 and so on. Nevertheless, we recommend the PRO SIMRIG PSR1 if you are running these Wheelbaseswith high torque settings.The bold Wheelbases are recommended for the PSR3. The non-bold Wheelbases are recommended for the PSR1.Pre-drilled holes for floor mounting are available for the following Wheelbases: Fanatec CSL DD / DD Pro (with optional Boost Kit). Fanatec DD1 / DD2 Fanatec CSW Asetek La Prima / Asetek Forte / Asetek Invicta Simagic Alpha / Simagic Alpha Mini Moza R9 / Moza R16 / R21 All Thrustmaster / Logitech Simucube 2 (Sport / Pro) - requires Simucube 90 degree front mount - sold separately WIDE PEDAL COMPATIBILITYIt is common knowledge that the greatest consistency is achieved through the brake pedal. For this reason, the PSR3 is equipped with a pedal deck that offers wide compatibility with the best pedal systems.Compatible pedal systems that use the manufacturer's base plate: Fanatec CSL / CSL (+LC) / V1 / V2 / V3 (+inverted). Venym Atrax Heusinkveld Sim pedals Sprint / Ultimate / Ultimate+ Meca Cup1 / Evo1 BJ Steel Asetek Forte / Invicta Moza S-RP / CRP SimTrecs ProPedal GT SimCoaches P1 / SimCraft PRO / ImSim Talento Requires additional mounting hardware as these pedals mount from the bottom. Need 4 x corner brackets, 8 x T-nuts, 8 x bolts. Very easy to mount. Thrustmaster T-LCM / T3PA / T3PM Logitech (all) Fanatec CSR / CSR Elite Weight: 40kg (2 boxes)Easy to modify and add attachmentsProfile: PRO SIMRIG Ultra Heavy Duty 40x80 and 40x40Color: Black profile, black angle brackets, black angle bracket covers, black and silver screws

    Versand nächster Werktag

    €498,00

  • PRO SIMRIG heavy duty wheels set

    PRO SIMRIG PRO SIMRIG heavy duty wheels set

    Versand nächster Werktag

    PRO SIMRIG heavy duty wheels set4 x 50mm red swivel castors + screw setNote: 2 wheels are lockable, 2 wheels are not lockable.Load capacity: 70kg per wheelHeight: 68mmWheel diameter: 50mmThese wheels offer an excellent aesthetic appearance. They are made of polyurethane, which offers excellent wear and abrasion resistance properties, high grip and resistance to many liquids and detergents, while having a high load capacity, as each caster wheel can support up to 70kg per wheel.Bolt set and T-nuts are included. Note that a Spherical head hex key may be required to obtain the proper angle to tighten the bolt from below.

    Versand nächster Werktag

    €24,50

  • PRO SIMRIG side mount

    PRO SIMRIG PRO SIMRIG side mount

    Versand nächster Werktag

    PRO SIMRIG side mountThe PRO SIMRIG side mount can be mounted on the side of your PRO SIMRIG PSR1 or other aluminum extrusion.The side mount provides the ability to add a manual shift lever or mouse pad tray, etc.A complete kit for mounting the side mount to the PSR1 rig is included.Compatibility:PRO SIMRIG PSR1Other 40mm profile rigs

    Versand nächster Werktag

    €65,00

  • PRO SIMRIG side wheelbase mount

    PRO SIMRIG PRO SIMRIG side wheelbase mount

    Versand nächster Werktag

    PRO SIMRIG side wheelbase mountBracket for side mounting your Fanatec CSL DD or DD1 or DD2.Complete kit for mounting the side mount bracket to the PSR1 rig.The bracket is built to include maximum adjustability, so it can take more or less all positions.The brackets are made of 10mm thick aluminum, coated black and are mounted with 40x80 aluminum profiles to maximize strength and avoid any bending.Brackets: always blackProfiles: BlackCan be used with other rig types. Designed for rigs with a distance of 580 mm between supports. If you have any doubts or further questions, please contact us.

    Versand nächster Werktag

    €129,00

  • PRO SIMRIG Seat XL Nordschleife by Cobra Motorsport

    PRO SIMRIG PRO SIMRIG Seat XL Nordschleife by Cobra Motorsport

    Versand nächster Werktag

    PRO SIMRIG Seat XL Nordschleife by Cobra Motorsport Extra large (XL) sim racing seat Designed for larger drivers Steel construction with solid back for maximum strength Breathable fabric High quality materials and workmanship Made especially for larger drivers!Sim racers come in all shapes and sizes. This seat is suitable for drivers who are either taller, wider in the middle or wider at the shoulders (or a combination of these 3 factors).The Nordschleife is generous in all proportions without losing the benefits of a fixed rear seat.Before this seat, taller drivers really only had 2 options. 1) buy a really expensive seat that accommodates XL sizes, 2) use an adjustable "armchair" seat, or 3) retrofit a car seat.None of these options offer what most sim racers are looking for: a sturdy seat with a firm back at an affordable price that doesn't compromise on performance. This is where the PRO SIMRIG Nordschleife XL sim racing seat from Cobra Motorsport comes into play. Tested by tall riders: 190cmTested by tall riders: 127cm waist (at belt height)Tested by wide riders: (very wide in the shoulder area)NOT HOMOLOGATED FOR STREET OR RACE TRACK USE! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

    Versand nächster Werktag

    €449,00

Login

Forgot your password?

Don't have an account yet?
Create account