Products

PRO SIMRIG Seat XL Nordschleife by Cobra Motorsport Extra large (XL) sim racing seat Designed for larger drivers Steel construction with solid back for maximum strength Breathable fabric High quality materials and workmanship Made especially for larger drivers!Sim racers come in all shapes and sizes. This seat is suitable for drivers who are either taller, wider in the middle or wider at the shoulders (or a combination of these 3 factors).The Nordschleife is generous in all proportions without losing the benefits of a fixed rear seat.Before this seat, taller drivers really only had 2 options. 1) buy a really expensive seat that accommodates XL sizes, 2) use an adjustable "armchair" seat, or 3) retrofit a car seat.None of these options offer what most sim racers are looking for: a sturdy seat with a firm back at an affordable price that doesn't compromise on performance. This is where the PRO SIMRIG Nordschleife XL sim racing seat from Cobra Motorsport comes into play. Tested by tall riders: 190cmTested by tall riders: 127cm waist (at belt height)Tested by wide riders: (very wide in the shoulder area)NOT HOMOLOGATED FOR STREET OR RACE TRACK USE! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

PRO SIMRIG Slot-In cable clamps 10-packThese cable clamps have the advantage of sliding easily into the aluminum profile (they fit all PRO SIMRIG profiles and other Series 40 Slot 8 profiles). See photos of how they slide into the profile and then twist. Can be used in the vertical position as it fits snugly in the slot.The two-sided cable clamp can be opened and reused with different cables on each side.It has a rubber band inside to secure the cables and a clip on each arm to secure and keep them neat.No glue required.Made of durable black nylon 66 material.Color: BlackPrice is per pack of 10 clips

Read more less

PRO SIMRIG Slotcover 5mFlexible slot covers for aluminum profilesEasy to slide inAvailable colors: black white red blue yellow orange green 5m lengthSuitable for 40x40 Profinut 8For aesthetic purposes or to keep dust out of the ducts!Easy to cut with scissors or craft knife (be careful!)

Read more less

PRO SIMRIG Keyboard Tray Fully adjustable keyboard tray.Complete kit for direct mounting on PSR1 or other aluminum extrusion rig (40 profile) is included.Keyboard tray is made of 4mm thick black coated aluminum.Compatibility: PRO SIMRIG PSR1 Other 40mm profile rigs

Read more less

PRO SIMRIG Top Monitor StandA PRO SIMRIG top monitor stand that can be attached to both single and triple monitor stands.A complete kit for mounting the top screen monitor stand to the single or triple monitor stands is included.Vesa mount, screws and nuts are also included (to attach the Vesa mount to the monitor stand).If you need mounting hardware for your monitor (to attach your monitor to the Vesa mount), please purchase this set (one per monitor).

Read more less

PRO SIMRIG Under Tray Eine Unterschale für die Seitenhalterung des PSR1, PSR3 oder eines anderen Aluminiumprofil-Rigs. Dies ist nützlich, um Ihr Telefon oder andere Gegenstände zu verstauen, ohne Ihr Mausfach zu überladen! Ein kompletter Montagesatz für das Under Tray ist im Lieferumfang enthalten (3 x M6x16mm Schrauben & 3 x M6x20mm Schrauben & 3 x M6 T-Nutensteine). Sie haben zwei verschiedene Schraubenlängen, je nachdem, ob Sie das PRO SIMRIG Mouse Tray oder das PRO SIMRIG Mini Tray montieren, oder nur das Under Tray allein. Das Tablett ist aus 4 mm starkem Aluminium gefertigt und schwarz pulverbeschichtet. Abmessungen (flaches Deck): 250 x 185 x 4 mm Kompatibilität: PRO SIMRIG PSR1 / PSR3 PRO SIMRIG Maus-Tablett PRO SIMRIG Mini-Tablett Geeignet für die Montage an anderen Aluminium-Profil-Rigs.   Fotos zeigen andere Teile/Zubehör. Dieses Angebot gilt nur für das Under Tray.

Read more less

PRO SIMRIG Universal Heel Rest Diese universelle Fersenstütze von PRO SIMRIG ist eine nützliche Ergänzung für jedes Setup, bei dem die Pedale nicht mit einer speziellen Grundplatte geliefert werden, oder wenn Sie Ihre Pedale mit einem Aluminiumprofil verschrauben müssen.  

Read more less

PRO SIMRIG Universal HolderThe Universal Holder is an inexpensive, versatile holder that can be used for a variety of things, including (but not limited to!): Button bar mount Headphone holder Steering wheel mount Webcam mount Bracket for key light Pre-drilled with M8 holes at both ends and 3 holes in the center for attaching attachments that need to be permanently mounted.Supplied as standard with 2 x M8 bolts, 2 x M8 washers and 2 x M8 slot nuts.Manufactured from 3mm thick carbon steel, powder coated in matt black.Dimensions: Inner length (distance between both ends) 130mm. Width (widest point) 80mm Width (narrowest point) 40mm Note: Profile, headphones and webcam are not included.

Read more less

PRO SIMRIG upgrade Kit Single- to Tripple-Monitorstand If you have started with a single PRO SIMRIG Monitor Stand and later want to change it to a triple Monitor Stand , you can add this add-on kit.You can choose between a light or a heavy version depending on your single monitor stand.Light = 40x40Heavy = 40x80Complete kit for mounting the upgrade kit to the single monitor stand is included. Vesa mounts, bolts and nuts also included.Have a different brand monitor stand?This kit may also fit other brands. 40x40 or 40x80 single monitor stands should allow you to upgrade to triples. Your center bar will need to be at least 100cm long for 27" screens, or 120cm long for 32" screens (120cm 40x40 and 40x80 bars are available in the DIY Parts section). If you are in any doubt whether this upgrade kit will fit your monitor stand, please contact us and we will help.

Read more less

PRO SIMRIG adjustable feet for monitor standIf you have an uneven floor, these adjustable feet can be added to level the monitor stand.A complete kit for mounting the feet to the monitor stand is included. The brackets are made of 10 mm thick black coated aluminum. The main bolts are M12 (12mm).The price is for a complete set of monitor stand feet. 4 feet, 4 brackets, screws, T-nuts and nuts.

Read more less

PRO SIMRIG Wheelbase mount universalThe bracket is suitable for mounting many different top-mounted wheelbases, such as Fanatec, Thrustmaster, Logitech, AccuForce, etc.Compatibility: Logitech Driving Force steering wheels (G29, G920). Thrustmaster steering wheels (T300 etc.) Fanatec CSW (V2.5 etc.) Fanatec DD1 (mounted below) Fanatec DD2 (bottom mounted) Fanatec CSL DD (bottom mounted) (new) SIMAGIC M10 (with SIMAGIC side mounts) Moza R16 / R21 (using Moza mounting plates) Other bottom mounted Wheelbases supplied with 90 degree brackets for bottom mounting Complete kit for mounting the bracket to the PSR1 rig. The mount is designed to provide maximum flexibility and is adjustable to take more or less any position.The brackets are made of 15mm aluminum and coated black. The side mounts are made of 10mm aluminum, black coated.Wheelbase mount and side mounts are mounted together with 40x80 aluminum extrusions to maximize strength and prevent any flexing, even when a Fanatec DD1 or DD2 is mounted on it.Can also be used with other rig types. Designed for rigs with a distance of 580 mm between supports. If you have any doubts or further questions, please contact us.

Read more less

Qubic System QS-210 3DoF Motion System The QS-210 3DoF motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This 3DoF motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.QS-210 – 3DOF SET HighlightsMaximum velocity: 400 mm/s per actuatorMaximum acceleration: 0.6 GActuator stroke: 60 mm | 2.36 inLatency: <8 msMaximum control frequency: 1000 HzVibration frequency range: 0-100 HzQS-210 – SET KEY FEATURES Home package – industrial grade performance into your home motion set. Compact design and extremely quiet operation Incredible realism of car acceleration One common environment – all in one Qubic Manager application VR HeadWay technology support (VR sickness compensation) Over 80+ integrated and supported racing games Proudly made in EU: Engineered, Designed and Manufactured in Poland

Read more less