Products

PRO SIMRIG Monitor Stand Triple Monitor, blackPRO SIMRIG monitor stands are built to stand independently of the simulation rig.The advantage of a free-standing monitor stand (not connected to the rig itself) is that it avoids the vibrations that come from steering wheel and pedal inputs. This can be especially noticeable when using a direct-drive wheelbase.Up to 32" monitors: Light version recommended (important note: Samsung G7 32" should use the Heavy version)32.5"+ monitors: Heavy version recommended Vesa 100: includes Vesa 50/75/100 drill pattern platesVesa mounts included? YesScrews and nuts included? YesDoes your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this set (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Take a look at the adjustable feet for monitor stands hereDIMENSIONS Light: Height: 1240mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 500mm Has 40x40 horizontal bar, arms and feet Heavy: Height: 1280mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 580mm Has 40x80 horizontal bar, arms and feet Note: The monitors are for illustration purposes only

Read more less

PRO SIMRIG Monitor VESA Mounting Bolt and Spacer KitThis kit is suitable for PRO SIMRIG VESA mounts and most common monitor setups.It is becoming more common for monitors to have a deep recess where the standard monitor mount sits. This looks great and makes for a nice flush finish, but it does mean that it can be difficult to fit aftermarket VESA mounts.With this kit, you can screw through the PRO SIMRIG VESA mounts, overcome most notches with the 8mm spacer, and bolt it to the back of the monitor.Kit includes:4 x M4 16mm screw4 x M4 8mm brass spacers1 Set required per Vesa mount/monitor (i.e. if you have a triple monitor stand, order 3 sets).*Please note: While we have found this combination to work well for most monitors we have dealt with, not every monitor is the same and different screws and spacers may be required to attach your monitor to the VESA mount. If you need help with this, please contact us.

Read more less

PRO SIMRIG Nordschleife XL - 100mm base cushion insert Sitzkissen 100mm Höhe (Sitzauflage), Einlage für Nordschleife XL  

Read more less

PRO SIMRIG Nordschleife XL - 50mm base cushion insert Sitzkissen 50mm Höhe, Einlage für Nordschleife XL

Read more less

 PRO SIMRIG P-APS Holder Brackets (Pair) Slot-8 Easily attach your SIMAGIC Accessories Power Supply (P-APS) to your aluminium cockpit.Simply twist in the profile slot and push the power supply through.Note, the twist action only works one way (by design), do not force it to go the other direction. If you want to change the orientation, remove the bracket from the slot and flip 180 degrees and twist again.Price is for a pair of brackets (2) in blackNote: this product is a 3D printed part. It may have some small surface imperfections. This does not affect the function of the part. The design has been optimized and is printed to tight tolerances using high quality materials. This product will sustain normal UV exposure and normal room temperatures as well as normal PSU temperatures.

Read more less

PRO SIMRIG PC StandPRO SIMRIG PC Stand for direct mounting on the PRO SIMRIG PSR1 Rig.Complete kit for mounting the PC stand on the PSR1 rig is included.A 22mm thick laminated board is included (66x25cm).The two main advantages of the PC stand are: Utilizing the space behind the monitors that you normally never use. Also, you can use shorter cables from the PC to the monitors, Wheelbase, etc.Compatibility:PRO SIMRIG PSR1Other 40mm profile rigs

Read more less

PRO SIMRIG PSR1 & PSR3 bottom mounted pedals mounting kit This kit is required for bottom-mounted pedals, e.g. for the Thrustmaster T-LCM. It is suitable for both the PRO SIMRIG PSR1 and the PRO SIMRIG PSR3.Contains: 4 x 40x40 Angle Brackets (Black) 4 x M8 T-slot nut 4 x M8x16 mm cap screw 4 x M6x16 mm button head screw 4 x M6x20 mm button head screw

Read more less

PRO SIMRIG PSR1 black baseThe PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a base rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base section, seat rails, a vertical section, a wheelbase section (wheelbase bracket not included) and a pedal section with adjustable pedal plate.All parts like angles, screws, nuts etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.

Read more less

PRO SIMRIG PSR1 black with front wheelbase mountThe PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a base rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base section, seat rails, a vertical section, a wheelbase section, the front wheelbase posture and a pedal section with adjustable pedal plate.All parts such as brackets, screws, nuts, etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.Supported Wheelbases: Simagic Alpha U Simucube 2 Sport / Pro / Ultimate Fanatec DD1 / DD2 Moza R16 / R21 VRS Direct Force Pro All Asetek - requires Asetek Floor Mount, combined with the PSR1 Misc. mount, or take the PSR1 No Wheel Bracket option and use the Asetek Side Mount

Read more less

PRO SIMRIG PSR1 black with side wheelbase mount (DD1,DD2)The PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a basic rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base section, seat rails, a vertical section, a wheelbase section, the side wheelbase posture and a pedal section with adjustable pedal plate.All parts such as brackets, screws, nuts, etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.Supported Wheelbases: Fanatec DD1 Fanatec DD2 Fanatec CSL DD Fanatec DD Pro CSL DD/DD Pro/DD1/DD2 Bracket

Read more less

PRO SIMRIG PSR1 black with Wheelbase mount universalThe PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a basic rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base part, seat rails, a vertical part, a wheelbase part, the universal wheelbase posture and a pedal part with adjustable pedal plate.All parts such as brackets, screws, nuts, etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.Supported Wheelbases: Logitech Driving Force wheels (G29, G920) Thrustmaster steering wheels (T300 etc.) Fanatec CSW (V2.5 etc.) Fanatec DD1 (mounted below) Fanatec DD2 (bottom mounted) Fanatec CSL DD (bottom mounted) Fanatec DD Pro (bottom mounted) SIMAGIC M10 (with SIMAGIC side mounts) Moza R9 / R16 / R21 (using Moza mounting plates - the 4-to-3 hole adapter) Other Wheelbases that mount from the bottom, or that come with 90-degree brackets that allow mounting from the bottom

Read more less

PRO SIMRIG PSR3 - Simagic Alpha Edition Not all rigs are created equal. The thought process behind the PSR3 was "how do we squeeze as much rigidity out of a value oriented cockpit, without losing adjustability".  This new SIMAGIC Alpha Edition has a new bespoke Front Mount for a clean aesthetic when using an Alpha Mini, Alpha or Alpha U wheelbase. PSR3 is blessed with the same ultra heavy duty profiles that are used on the PSR1. Significantly thicker side walls provide more mass, more weight and more rigidity than its competitors. For the uprights, the steering section is of an overlapping design. This uses more material and costs more, but the result is a better anchor for the wheel deck to be supported by the rig perimeter. The wheel section uses the same extremely rigid design of the PSR1. It uses a 10mm thick aluminium wheel deck, mated to profile and adjustable side plates. PSR3 has a great pedal section. It's design is an evolution of the PSR1, where two 10mm aluminium plates sandwich two 80mm profiles, mounted with 8 direct fixings. Many drivers prefer a very stiff brake setup, and so the PSR3 had to be built with that in mind. Other designs often suffer with flex in the pedal section, primarily down to cost savings on material and design choices. Braced Side Mount Included as standard Continuing with the idea of "overlap = strength", the PSR3 includes a braced side mount. This reduces lateral movement when shifters or handbrakes are attached to the side mount.To help you find the perfect height, two different mounting heights allow an 80mm level of adjustment in 1mm increments.The side mount comes with 1 x 40x80x490mm profile, and 1 x 40x40x350mm profile.The side mount can be attached to either the left or right of the PSR3 cockpit. SIMAGIC Alpha Edition WHEELBASE COMPATIBILITY The PSR3 SIMAGIC Alpha Edition provides a bespoke Front Mount bracket for a clean aesthetic.The PSR3 can also handle the strongest Alpha U. That being said, we recommend going for the PRO SIMRIG PSR1 if you are running this wheelbase at the highest  torque settings to minimise vibration. Wheelbases in bold are recommended for the PSR3 SIMAGIC Alpha Edition. Wheelbases not in bold are recommended for the PSR1. Pre-drilled holes for front mounting exist for the following wheelbases: Siamgic Alpha Mini Simagic Alpha EVO Sport SIMAGIC Alpha Simagic Alpha EVO Simagic Alpha EVO Pro Simagic Alpha U WIDE pedal COMPATIBILITY It is common knowledge that the most consistency is gained through the brake pedal. With that in mind, the PSR3 has a pedal deck that has wide compatibility with top end pedal systems. Compatible pedal systems using the manufacturers baseplate: SIMAGIC P500 / P1000 / P1000i / P2000 Fanatec CSL / CSL (+LC) / V1 / V2 / V3 (+inverted) Venym Atrax Heusinkveld Sim Pedals Sprint / Ultimate / Ultimate+ Meca Cup1 / Evo1 BJ Steel Asetek Forte / Invicta Moza S-RP / CRP SimTrecs ProPedal GT SimCoaches P1 / SimCraft PRO / ImSim Talento  Requires additional mounting hardware because these pedals mount from underneath. Uses 4 x corner brackets, 8 x t-slot nuts, 8 x bolts. Very easy to mount. Kit can be pruchchased separately. Thrustmaster T-LCM / T3PA / T3PM Logitech (all) Fanatec CSR / CSR Elite

Read more less