Products

Qubic System QS-220 Bracket SetQubic System is not only a motion platform, but also a wide range of sim accessories. The universal brackets for Qubic System actuators and 3rd party racing cockpits. The QS brackets have a hole spacing that fits the most common simracing cockpits on the market. The brackets are available as a set (one pair) with a set of screws.

Read more less

Qubic System QS-BT1 Belt Tightening SystemThe QS-BT1 is a multi-purpose dual channel direct drive seatbelt tensioner that enhances immersion in racing simulations like no other device in its class and price range. It is powered by the same technology as the stunning QS-220. It not only completes the force feedback of the direct-drive wheels, but also enhances the overall experience of the already highly immersive QS motion platforms and can even be used as a standalone, independent device if required.Simulation of braking, lateral acceleration, cornering at high speeds, wheel lock-up and loss of traction are among the key features of QS-BT1. Asymmetric engine vibrations and road effects such as rumble strips are also available for games that support them. Although QS-BT1 was mainly developed for racing simulations, with its 200 N force per channel it can also be successfully used in flight simulators to give you the feeling of gigantic forces during high acceleration maneuvers.

Read more less

 Qubic System QS-CH2 2DoF motion platform 2DoF motion platform that gives the SURGE and YAW motion for even better of feeling vehicle’s traction loss, breaking and accelerating. The motion system based on world’s fastest linear actuator’s technology provides incredible levels of vehicle feedback to the driver. This motion platform is suitable for Rally, Drift, GT and F1 simulations. The platform is fully compatible with Qubic System 3DOF actuator’s set and QS-CH1 motion cockpit.

Read more less

Qubic System QS-H13 Seat Mover QS-H13 Challenger sets a new benchmark in the world of motion systems for those seeking a compact and ultra-quiet solution for their driving or flight simulator. The Qubic System seat mover – QS-H13, built using the same advanced technology as the QS-220 actuators, outperforms and challenges all currently available seat mover solutions.By delivering smooth and precise motion across two axes (pitch/roll), it accurately simulates the forces experienced during braking, cornering in a car, or executing sharp maneuvers in an aircraft.

Read more less

Qubic System QS-MC6 (motion controller) Motion controller required for motion platforms.Each simulator requires at least 1x QS-MC6. Contains:- 1x M10- 1x Motion lock- 1x BUS terminator- Set of cables

Read more less

Qubic System QS-V20 extended 4DoF motion cockpit The QS-V20 is an extended 4DoF motion cockpit, designed for pro racing car simulation, dedicated to both drivers training and sim racing enthusiasts. The motion system based on world’s fastest linear actuator’s technology provides incredible levels of vehicle feedback to the driver. This motion platform is suitable for Rally, GT and F1 simulations, also the small footprint and lightweight design allow to fit the machine to every racing room.

Read more less

Qubic Systems QS-S25 Spider The QS-S25 is an advanced motion cockpit designed for the most demanding racers who are looking for a professional simulation experience at the highest level. The motion system is based on patent-pending linear drive technology and enables a significantly more intense range of sensations, such as understeer, loss of traction, or brake overload, blurring the line between reality and the virtual environment. Thanks to the combination of special accessories and the QubicManager software, the 6DoF motion platform offers drivers an extreme experience, just like in a real race or ultimate flight.Architecture 6DOFPayload 250 kg | 551 lb (base QS-S25 – without accessories)Product weight 350 kg | 722 lbMAIN DIMENSIONS Total width 1701 mm | 66.97 inMinimum height 769 mm | 30.27 inQS-S25 (6DOF) consists of:- 3x QS-220 motion set- Special upper and lower frame- Motion control- Motion lock- Cable set- Power connection hub- Set of transport wheelsQS-S25 (cockpit set) consists of:- Upper frame base with mounting points- Set of rods – both sides- Step- Set of eyelet nuts for safety belts- Mounting bracket: Steering wheel (two types)- Mounting bracket: Pedals- Mounting bracket: Racing seat- Mounting bracket: Table with mounting points- Mounting bracket: VR headset headphones- Mounting bracket: Keyboard- Mounting bracket: speakers- Mounting bracket: QS-BT1- Racing seat adjustmentQS-S25 (3x monitor bracket) consists of:- Mounting bracket: 3x monitor (32'', VESA 100x100)The price includes packaging and shipping (wooden box).

Read more less

ROLINE Apparatus connection cable, IEC 320 C14 - C13 Appliance connection cable with moulded PVC IEC plug and IEC socket in various colors and lengths to match the color of your Simrig Cable with molded PVC appliance plug and socket Rated data: 10A / 250VAC e.g. for monitor power supply via the computer or as an extension for existing cable

Read more less

ROLINE power cable Schuko to straight IEC socketROLINE power cable with angled safety plug and IEC socket C13 for connecting computers, printers, monitors or UPS Cable with earthing contact plug and appliance socket (IEC socket) Rated data: 10A, 250V AC Connections: 90° angled earthing contact plug, straight IEC socket Note: Suitable for Germany, Belgium, France

Read more less

Sabelt Adjustable Pedal Mount B-Stock rom return, briefly used, full warrantyThe adjustable pedal mount allows different pedals to be fitted and can be adjusted in height, depth and angle thanks to the slots milled into the aluminum side plates. Anodized aluminium profiles with Zero-X technology. High strength and torsion resistance thanks to the 80x40 and 40x40 profiles and the 10 mm thick CNC side plates. Height, depth and angle adjustment. COMPATIBLE WITH THE SERIES: S | XWHAT IS INCLUDED: Aluminum profiles, aluminum plates, fasteners and screws.NOT INCLUDED: Pedal heel support plate

Read more less

Adjustable Pedal Mount Black Die ultimative verstellbare PedalhalterungDiese Halterung ist mit einer Vielzahl von Pedalsystemen kompatibel und bietet eine unvergleichliche Flexibilität. Höhe, Tiefe und Neigung lassen sich dank der präzisionsgefrästen Schlitze an den robusten Aluminium-Seitenplatten mühelos einstellen. Die Halterung ist perfekt für die individuelle Anpassung ausgelegt und stellt sicher, dass jeder Fahrer seine ideale Einstellung für maximale Kontrolle und Komfort findet.

Read more less