Lagerware

PRO SIMRIG Cable Management Tube 2mEasy to wrap around your cablesSimply open the rolled-up fabric to feed your cables through. The soft, flexible sleeve automatically rolls back and wraps around your cables. It can also be extended to wrap more cables if required. No tools are required and cables do not need to be disconnected from the computer to be inserted into the cable management sleeve.It is a soft textile sleeve, not the harder braided variety.Can be easily cut to any length: With a sharp pair of scissors, you can cut the cable guide sleeve to the desired length so that it fits exactly in and around your rig.Technical data: Length: 2m (6.5') Diameter: 32 mm (1.25") Flexible design Polyester and nylon Color: Black

Read more less

Asetek SimSports GT Rim Closed D Black Leather The steering wheel has a diameter of 330 mm. They embody Asetek's commitment to quality and craftsmanship and enrich your sim racing journey. Choose your style and take your racing to the next level. Closed D steering wheel rim Black leather Red center stripe Black perforated leather grips Suitable for Asetek La Prima and Forte GT button box

Read more less

Pimax Facial Foam For Comfort Kit Large surface areaDistributes pressure evenly over the face for optimal comfortEasy to install and cleanCompatible with Pimax Crystal/Crystal-Sim/Crystal Light/8KX,8K PLUS,5K Super, and so on.

Read more less

Qubic System QS-MC6 (motion controller) Motion controller required for motion platforms.Each simulator requires at least 1x QS-MC6. Contains:- 1x M10- 1x Motion lock- 1x BUS terminator- Set of cables

Read more less

Asetek SimSports Bottom Mount w. Table Clamps Mount your wheelbase to most horizontal surfaces! With the Bottom Mount w. Table Clamps, you get a very versatile mounting solution, that enables you to mount your wheelbase to either a horizontal surface, wheeldeck or aluminum rig. Made in powder coated steel featuring silicone pads for scratch protection of the mounting surface. 8mm Allen socket for adjusting and tightening to your preferred surface.

Read more less

PRO SIMRIG Under TrayAn under tray for the side mount of the PSR1, PSR3 or any other aluminum profile rig. This is useful for storing your phone or other items without cluttering up your mouse compartment!A complete mounting kit for the Under Tray is included (3 x M6x16mm screws & 3 x M6x20mm screws & 3 x M6 T-nuts). You have two different screw lengths depending on whether you are mounting the PRO SIMRIG Mouse Tray or the PRO SIMRIG Mini Tray, or just the Under Tray alone.The tray is made of 4 mm thick aluminum and powder-coated in black.Dimensions (flat deck): 250 x 185 x 4 mmCompatibility: PRO SIMRIG PSR1 / PSR3 PRO SIMRIG mouse tray PRO SIMRIG mini tray Suitable for mounting on other aluminum profile rigs. Photos show other parts/accessories. This offer is only valid for the Under Tray.

Read more less

Moza Flight Base Table Clamp The MOZA Flight Base Table Clamp is engineered for both stability and versatility, making it an essential addition to your flight simulation setup. Crafted from high-strength steel with a 5mm thick plate, it guarantees a secure and wobble-free experience. The adjustable C-clamp allows for flexible mounting options—whether on top of your desk or suspended underneath—fitting desktops up to 70mm thick. Designed specifically to support the AB9 FFB Base, this clamp adapts to your unique setup, providing reliable performance in a space-saving design.

Read more less

Moza Flight Base Mounting Adapter Black The MOZA flight base mounting adapter offers the possibility to attach your MOZA flight setup easily and robustly. Whether with suction cups on the table or screws on a rig, with the MOZA mounting adapter your base, throttle or other accessories are firmly and securely attached to your setup.

Read more less

Asetek Simsports Forte® Pedal Face Plates for Brake, Throttle and Clutch (Set of 3)The all-aluminum Forte Pedal Face Plates are a sock-friendly, quick-fit accessory for your Invicta™ sim racing pedals. The pedal plates can be adjusted to your preferred setting for the best sim racing experience.The set includes three pedal plates for brake, throttle and clutch.

Read more less

GSI Gomez Captive Screw SetGSI captive screws are made specifically for sim racers to properly connect quick releases, extension hubs and threaded component adapters. They are made of high quality 12.9 carbon steel black with custom 360 Loctite for maximum hold and strength. With an 8mm smooth shaft and 5mm thread, they are suitable for most sim racing equipment. Common applications include mounting Fanatec Podium Hub and other threaded QRs to the threaded body of a GSI. They are sold in sets of 6 captive screws and can be used with any sim racing wheel or hub in general.

Read more less

Simagic Q1 Sequential Shifter Standard Take your racing simulation experience to the next level with the Simagic Q1 Sequential Shifter, a premium shifter designed for sharp and clean simulation experiences. Designed for enthusiasts and professional racers alike, the Q1 Shifter combines premium materials, innovative technology and user-friendly features to immerse you in the racing action with unparalleled precision and feedback.Key features: Planetary Gear Set: experience the iconic, sharp and clean mechanical feedback that resembles shifting gears in a real race car, powered by a sophisticated planetary gear set. Adjustable damper: The adjustable damper allows you to customize the shifting experience and adjust the resistance to your preferred riding style. USB ports on both sides: For exceptional connectivity, the Q1 has crystal-clear USB ports on both sides for easy and reliable connection with third-party devices. Built-in LED gear indicator: Keep up to date with the integrated LED gear indicator. There are also 4 programmable RGB buttons for additional functions such as selecting neutral, activating the windshield wipers or switching on the headlights. CNC aluminum construction: Durability meets design in the Q1's all-metal construction. The aluminum alloy is supported by a sturdy metal structure that can withstand even the most intense racing sessions. 4 Programmable RGB Buttons: Expand your racing simulation setup with customizable RGB buttons that add both functionality and a touch of personalization to your rig. Technical excellence: The Q1 Sequential Shifter supports rear mounting, comes with an optional extended handle and with its dimensions of 180mm x 63mm x 269mm fits perfectly into your racing setup. Improve your setup:Combine the Q1 Sequential Shifter with the TB-1 handbrake, GT1 steering wheel and P2000-R hydraulic pedals for the ultimate in race simulation.Included in delivery:Screw setPower supply unitUSB cableM6 screw with threaded hole*4 for easy installationWith its blend of cutting-edge technology, customizable features and robust build quality, the Simagic Q1 Sequential Shifter is a must-have addition for any serious sim racer looking to push their performance to the limit. Experience the thrill of racing with every shift.

Read more less

Simagic P-TSK Genuine carbon fiber pattern availableDifferent pommel shapes and lengths meet the needs of each individual and allow for exceptional performance.

Read more less