Welcome Qubic Systems - 5% discount with code Qubic until 31.3.24!

Monitor mounts

8 products

  • PRO SIMRIG Monitor VESA Mounting Bolt and Spacer Kit

    PRO SIMRIG PRO SIMRIG Monitor VESA Mounting Bolt and Spacer Kit

    Versand nächster Werktag

    PRO SIMRIG Monitor VESA Mounting Bolt and Spacer KitThis kit is suitable for PRO SIMRIG VESA mounts and most common monitor setups.It is becoming more common for monitors to have a deep recess where the standard monitor mount sits. This looks great and makes for a nice flush finish, but it does mean that it can be difficult to fit aftermarket VESA mounts.With this kit, you can screw through the PRO SIMRIG VESA mounts, overcome most notches with the 8mm spacer, and bolt it to the back of the monitor.Kit includes:4 x M4 16mm screw4 x M4 8mm brass spacers1 Set required per Vesa mount/monitor (i.e. if you have a triple monitor stand, order 3 sets).*Please note: While we have found this combination to work well for most monitors we have dealt with, not every monitor is the same and different screws and spacers may be required to attach your monitor to the VESA mount. If you need help with this, please contact us.

    Versand nächster Werktag

    €4,80

  • PRO SIMRIG Monitor Stand Triple Monitor, black

    PRO SIMRIG PRO SIMRIG Monitor Stand Triple Monitor, black

    ["~ 3 Wochen / weeks"]

    PRO SIMRIG Monitor Stand Triple Monitor, blackPRO SIMRIG monitor stands are built to stand independently of the simulation rig.The advantage of a free-standing monitor stand (not connected to the rig itself) is that it avoids the vibrations that come from steering wheel and pedal inputs. This can be especially noticeable when using a direct-drive wheelbase.Up to 32" monitors: Light version recommended (important note: Samsung G7 32" should use the Heavy version)32.5"+ monitors: Heavy version recommended Vesa 100: includes Vesa 50/75/100 drill pattern platesVesa mounts included? YesScrews and nuts included? YesDoes your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this set (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Take a look at the adjustable feet for monitor stands hereDIMENSIONS Light: Height: 1240mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 500mm Has 40x40 horizontal bar, arms and feet Heavy: Height: 1280mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 580mm Has 40x80 horizontal bar, arms and feet Note: The monitors are for illustration purposes only

    ["~ 3 Wochen / weeks"]

    €279,00 - €378,00

  • PRO SIMRIG Monitor Stand Single Monitor from 32.5", black

    PRO SIMRIG PRO SIMRIG Monitor Stand Single Monitor from 32.5", black

    Versand nächster Werktag

    PRO SIMRIG Monitor Stand Single Monitor from 32.5", blackPRO SIMRIG monitor stands are built to stand separately from the rig. This stand is for a single monitor.Separate monitor stands (that are not connected to the rig) avoid vibrations coming from the rig. This is especially important when using a direct drive Wheelbase.The monitor stand is flexible and can be adjusted in height and width to suit your needs.For monitors from 32" monitors: (heavy version) recommendedVesa 100: including vesa 50/75/100 drill image plateVesa mounts included? YesScrews and nuts included? YesCan I upgrade to triple monitors at a later date? YesDoes your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this kit (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Check out the adjustable feet for monitor stands hereDIMENSIONSHeight: 1280mm (post + feet)Width: 1200mm (horizontal bar)With 40x80 horizontal bar and feetNo monitor included, picture is for illustration purposes only

    Versand nächster Werktag

    €229,00

  • PRO SIMRIG upgrade Kit Single- to Tripple-Monitorstand

    PRO SIMRIG PRO SIMRIG upgrade Kit Single- to Tripple-Monitorstand

    Versand nächster Werktag

    PRO SIMRIG upgrade Kit Single- to Tripple-Monitorstand If you have started with a single PRO SIMRIG Monitor Stand and later want to change it to a triple Monitor Stand , you can add this add-on kit.You can choose between a light or a heavy version depending on your single monitor stand.Light = 40x40Heavy = 40x80Complete kit for mounting the upgrade kit to the single monitor stand is included. Vesa mounts, bolts and nuts also included.Have a different brand monitor stand?This kit may also fit other brands. 40x40 or 40x80 single monitor stands should allow you to upgrade to triples. Your center bar will need to be at least 100cm long for 27" screens, or 120cm long for 32" screens (120cm 40x40 and 40x80 bars are available in the DIY Parts section). If you are in any doubt whether this upgrade kit will fit your monitor stand, please contact us and we will help.

    Versand nächster Werktag

    €125,00 - €149,00

  • PRO SIMRIG Top Monitor Stand

    PRO SIMRIG PRO SIMRIG Top Monitor Stand

    ["~ 3 Wochen / weeks"]

    PRO SIMRIG Top Monitor StandA PRO SIMRIG top monitor stand that can be attached to both single and triple monitor stands.A complete kit for mounting the top screen monitor stand to the single or triple monitor stands is included.Vesa mount, screws and nuts are also included (to attach the Vesa mount to the monitor stand).If you need mounting hardware for your monitor (to attach your monitor to the Vesa mount), please purchase this set (one per monitor).

    ["~ 3 Wochen / weeks"]

    €109,00

  • PRO SIMRIG Integrated single monitor mount for PSR1 (660mm)

    PRO SIMRIG PRO SIMRIG Integrated single monitor mount for PSR1 (660mm)

    ["~ 3 Wochen / weeks"]

    PRO SIMRIG Integrated single monitor mount for PSR1 (660mm)Extra strong and rigid thanks to the 40x80 profile that solidifies the constructionStrong aluminum side platesMinor angle adjustments on the profile without having to move the side bracketsSupplied with a VESA 50/75/100 bracketThe mount is suitable for the PRO SIMRIG PSR1 or any other aluminum profile rig where the outside of the uprights (or the inside of the uprights) is 660 mm.Supplied with screws and T-nuts to attach to your rig.

    ["~ 3 Wochen / weeks"]

    €179,00

  • PRO SIMRIG adjustable feet for monitor stand

    PRO SIMRIG PRO SIMRIG adjustable feet for monitor stand

    Versand nächster Werktag

    PRO SIMRIG adjustable feet for monitor standIf you have an uneven floor, these adjustable feet can be added to level the monitor stand.A complete kit for mounting the feet to the monitor stand is included. The brackets are made of 10 mm thick black coated aluminum. The main bolts are M12 (12mm).The price is for a complete set of monitor stand feet. 4 feet, 4 brackets, screws, T-nuts and nuts.

    Versand nächster Werktag

    €79,00

  • PRO SIMRIG Integrated single monitor mount for PSR3 (650mm)

    PRO SIMRIG PRO SIMRIG Integrated single monitor mount for PSR3 (650mm)

    Versand nächster Werktag

    PRO SIMRIG Integrated single monitor mount for PSR3 (650mm)Extra strong and rigid thanks to the 40x80 profile that solidifies the constructionStrong aluminum side platesMinor angle adjustments on the profile without having to move the side bracketsSupplied with a VESA 50/75/100 bracketBracket suitable for the PRO SIMRIG PSR3 or other aluminum extrusion where the outside of the uprights (or the inside of the uprights) is 650mm.Supplied with screws and T-nuts to attach to your rig.

    Versand nächster Werktag

    €179,00

Monitorhalterungen

Login

Forgot your password?

Don't have an account yet?
Create account