Motionsysteme

Qubic System QS-BT1 Belt Tightening SystemThe QS-BT1 is a multi-purpose dual channel direct drive seatbelt tensioner that enhances immersion in racing simulations like no other device in its class and price range. It is powered by the same technology as the stunning QS-220. It not only completes the force feedback of the direct-drive wheels, but also enhances the overall experience of the already highly immersive QS motion platforms and can even be used as a standalone, independent device if required.Simulation of braking, lateral acceleration, cornering at high speeds, wheel lock-up and loss of traction are among the key features of QS-BT1. Asymmetric engine vibrations and road effects such as rumble strips are also available for games that support them. Although QS-BT1 was mainly developed for racing simulations, with its 200 N force per channel it can also be successfully used in flight simulators to give you the feeling of gigantic forces during high acceleration maneuvers.

Read more less

Simrig SR2 Motion System The SIMRIG SR2 is a powerful motion system. Equipped with industrial grade motors, a redesigned ECU and a more powerful power supply, the SIMRIG SR2 is a professional device. All devices are developed, built and tested by SIMRIG in Sweden. The SIMRIG SR2 can move a total load of 225 kg. This is 50 kg more than the smaller version (SR1).Despite its power and accuracy, its footprint is small. The actuators are mounted directly to your rig. The control unit fits easily under your seat. The power supply can be stowed next to the computer. The SIMRIG SR2 enhances your rig without making it too big. The motion system is accompanied by SIMRIG Control Center at no additional cost or subscription fee. The software interprets the movement of the simulated vehicle and uses this data to move your rig accordingly. It supports all major simulation titles. The installation is plug-and-play. Connect the actuators, the ECU, the power supply and the emergency stop switch. Connect a few cables. Install the software. Then you are ready to go! Scope of delivery:- 4x SIMRIG SR2 linear actuator- 1x SIMRIG SR2 control unit- 1x 1000W power supply (100-240V)- 1x emergency stop- 4x linear actuator cable (1m)- 1x EU power cable (C13)- 1x USB cable (3m)- 1x Low voltage power cable (2m)- 1x SIMRIG Control Center (Key for download)- assorted screws and T-nuts

Read more less

Qubic System QS-MC6 (motion controller) Motion controller required for motion platforms.Each simulator requires at least 1x QS-MC6. Contains:- 1x M10- 1x Motion lock- 1x BUS terminator- Set of cables

Read more less

Simrig SR1 motion systemThe SIMRIG SR1 has been sold to all corners of the world since 2018. All units are designed, built and tested by SIMRIG in Sweden.The SIMRIG SR1 is designed for maximum immersion and ease of use. With its small footprint, it can be mounted on your existing rig made of aluminum profiles. The electronic control unit is small enough to mount under your seat. It connects directly to your computer via USB. The power supply works with 100-240 V mains voltage.For the best performance, durability and user experience, the maximum load is set at 175 kg. The maximum load includes the rig, the driver, other peripherals and additional weight moved by the SIMRIG SR1 motion system.The system has three degrees of freedom (3-DOF): pitch, roll and heave. With pitch and roll, the system can simulate acceleration, braking and cornering. It can also follow the track geometry, for example by leaning forward when driving downhill. With Heave, the system can push the rig upwards when you hit kerbs and bumps in the road.The SIMRIG SR1 is accompanied by SIMRIG Control Center. This software controls the motion system by interpreting the position and acceleration of the simulated vehicle. It supports all major simulation titles.A complete motion system: 4x SIMRIG SR1 linear actuator 1x SIMRIG SR1 ECU 1x 500W power supply (100-240 V at 50-60 Hz) 1x emergency stop switch 4x cable for linear drive (1m) 1x power cable for ECU (2m) 1x power cable (C13) 1x USB cable (3m) 1x SIMRIG Control Center (download) Various screws and T-slots And mounting brackets for your selected rig: 4x SIMRIG SR1 bracket 4x aluminum profile 780x20x20 mm 4x aluminum angle brackets 4x profile cover Various screws and T-slots

Read more less

Qubic System QS-220 Bracket SetQubic System is not only a motion platform, but also a wide range of sim accessories. The universal brackets for Qubic System actuators and 3rd party racing cockpits. The QS brackets have a hole spacing that fits the most common simracing cockpits on the market. The brackets are available as a set (one pair) with a set of screws.

Read more less

Qubic System QS-210 3DoF Motion System The QS-210 3DoF motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This 3DoF motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.QS-210 – 3DOF SET HighlightsMaximum velocity: 400 mm/s per actuatorMaximum acceleration: 0.6 GActuator stroke: 60 mm | 2.36 inLatency: <8 msMaximum control frequency: 1000 HzVibration frequency range: 0-100 HzQS-210 – SET KEY FEATURES Home package – industrial grade performance into your home motion set. Compact design and extremely quiet operation Incredible realism of car acceleration One common environment – all in one Qubic Manager application VR HeadWay technology support (VR sickness compensation) Over 80+ integrated and supported racing games Proudly made in EU: Engineered, Designed and Manufactured in Poland

Read more less

Qubic System QS-210 acturators (2 pcs) Multipurpose linear actuators set compatible with QS-CH1, QS-CH2 and most aluminium profile based cockpits available on the global market (using brackets).Actuator stroke of 6cm / 2.36in. Contains:- 2x actuator (QS-L5) with stabilization plate- 1x power cabinet (QS-SB2)- Set of cables- Set of screws- 2x bracket for QS-L5 actuator (QS-210)

Read more less

QS-BT1: Installation kit for Next Level Racing® Motion Platform V3 The QS-BT1 to Next Level Racing® Motion Platform V3 Installation Kit is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for quick installation and stable connection between motion platform and belt tensioner QS-BT1. Whether you’re configuring new equipment or upgrading existing components, this bracket ensures an easy and hassle-free installation process.

Read more less

Nitro Concepts Immersion Metahaptics The Nitro Concepts IMMERSION Metahaptics cushion set revolutionizes sim racing by providing sim racers with an intense and realistic driving experience through advanced haptic technology. Haptic feedback: experience every single bump on the road High-quality materials for endless racing fun without compromise Extremely robust - perfect for intense racing action Compatible with multiple games for limitless driving fun on any track Maximum comfort, even during hours of racing sessions Nitro Concepts IMMERSION Metahaptics - Haptic feedback for realistic racing simulations The Nitro Concepts IMMERSION Metahaptics cushion set, developed in collaboration with Sensit!, offers you a completely new kind of immersion. The innovative cushion set is specially designed for the Nitro Concepts R300 bucket seat and integrates advanced haptic feedback to make racing simulations more realistic and intense. With the integrated actuators, every bump, braking point and corner can be felt, making the driving experience in the simulator almost like that of a real racing car. Individually customizable feedback for maximum control Metahaptics technology not only offers impressive full-body feedback, but is also 100% customizable. With the Sensit! software, you can individually adjust the intensity of the feedback for the backrest and seat. There are also predefined profiles for popular racing simulators such as Assetto Corsa and iRacing, which you can select and adjust with just a few clicks. This function allows you to optimize your setup depending on your preference or racing situation. High-quality materials and easy installation With the IMMERSION Metahaptics cushion set, you not only get sophisticated and innovative technology, but also a pleasant feel. The cushions are covered with a breathable 3D mesh fabric that offers you optimum comfort and durability. Thanks to the plug-and-play function, the set can be easily integrated into the R300 seat in just a few minutes. All the necessary components are included, such as a USB-C cable, power supply and mounting accessories, as well as the box for the control unit, so that the system is ready to use straight away. Get in, drive off and feel your vehicle like never before!   Color Main color black Power supply unit Power supply voltage 19 V Amperage 5,2 A Power supply unit output 100 W Compatibility Compatibility Nitro Concepts R300 Schalensitz Supported games Asetto Corsa, Asetto Corsa Competizione, iRacing Material Inner cushion material PUR Cushion cover material 3D mesh (100% polyester), velour (100% polyester) Control unit materials ABS+ Scope of delivery Scope of delivery 1x seat cushion 1x back cushion 1x center cushion cover 1x power supply 1x Metahaptics control unit 1x 3M Velcro straps<br> 1x USB-C to USB-A 1x instruction manual

Read more less

Simrig SR3 motion system The SIMRIG SR3 has come to life by the means of continuous improvement and customer feedback. Many of it's very best design features have been carried back to the SIMRIG SR1 and SR2.What sets the SIMRIG SR3 apart is its ability to handle a substantial load capacity. Responding to the community's request for a system that can support heavier setups, the SIMRIG SR3 boasts a total load capacity of 250 kg. This significant improvement opens up new possibilities for users to customize their rigs with heavier seats, additional peripherals, and more, without compromising on performance.Installation of the SIMRIG SR3 is a straightforward, plug-and-play process, designed to get you up and racing with minimal downtime. The package includes everything needed for a complete setup: actuators, the ECU, a power supply, and all necessary cables and hardware. It also comes with the SIMRIG Control Center software, which is the interface through which users can customize their motion feedback to match each vehicle's unique characteristics across all major simulation titles.MountingThe SIMRIG SR3 is compatible with most aluminium extrusion rigs. We provide off-the-shelf solutions for the most common sizes: 80x40, 120x40, 160x40 mm, and others on request.With the introduction of the SIMRIG SR3 we are also adding a new mounting system: the EasyBracket. It is now possible to mount the actuators directly to the sides of an aluminium extrusion rig. The EasyBracket comes pre-attached to the actuator, allowing for easy and quick installation.All actuator cables are now black, making them easier to hide under the rig.PerformanceAt its core, the SIMRIG SR3 is powered by industrial-grade motors, ensuring robustness and longevity. The system can actuate up to 250 kg. This includes the rig, the driver, and peripherals. The necessary power is seamlessly supplied by a fan-less 1000 W power supply; that connects to a normal household wall socket.Despite its powerful performance, the SIMRIG SR3 maintains a compact footprint. The actuators are designed to attach directly to your rig, while the ECU is compact enough to fit neatly under your seat. The power supply can be conveniently placed next to your computer, ensuring that the SIMRIG SR3 enhances your racing setup without imposing on your space.The SIMRIG SR3 is not just about raw performance; it's about enhancing the user experience. It comes with the SIMRIG Control Center software, which is optimized to remove undue latency. The system latency is negligible at only 7 milliseconds.

Read more less

Qubic System QS-V20 extended 4DoF motion cockpit The QS-V20 is an extended 4DoF motion cockpit, designed for pro racing car simulation, dedicated to both drivers training and sim racing enthusiasts. The motion system based on world’s fastest linear actuator’s technology provides incredible levels of vehicle feedback to the driver. This motion platform is suitable for Rally, GT and F1 simulations, also the small footprint and lightweight design allow to fit the machine to every racing room.

Read more less

 Qubic System QS-CH2 2DoF motion platform 2DoF motion platform that gives the SURGE and YAW motion for even better of feeling vehicle’s traction loss, breaking and accelerating. The motion system based on world’s fastest linear actuator’s technology provides incredible levels of vehicle feedback to the driver. This motion platform is suitable for Rally, Drift, GT and F1 simulations. The platform is fully compatible with Qubic System 3DOF actuator’s set and QS-CH1 motion cockpit.

Read more less