NIcht Lagernd

CHARACTERISTICS: Rugged stainless steel construction Virtually double pedal control and feed accuracy due to double action pedal arm design Heel can move up/down with the foot, resulting in excellent pedal control and advance accuracy Fully adjustable pedal surfaces and heel supports for optimal pedal feel and ergonomics Load cell in all pedals for throttle, brake and clutch Brake: 200 kg load cell / maximum load through the foot: 100 kg Silent operation due to the use of ball bearings and spherical rod ends Maintenance free: no lubrication required Installation pattern (click to open): 87 mm (lateral) x 80 mm (longitudinal) ⇒ Can be mounted directly on aluminum profiles (minimum 40×120 mm) Adjustable pedal tilt angle +8 / -16 degrees. Super easy and quick adjustment of pedal travel, pedal feel and required actuation force Adjustable max. compression for each polyurethane spring in 1 mm increments Adjustable brake travel limiter (does not limit load, only travel) 12 bit resolution Calibration software with adjustable dead zones Non-linear response curves Save to file and load from file for profiles Pedal-to-controller box cable lengths: Brake 35 cm, Throttle 25 cm Double shielded USB cable Controller box equipped with mounting holes (M4) Can be mounted directly to an industry standard 80/20 aluminum profile (min. 40×120 mm or 2 separate profiles) Designed, manufactured and assembled in Finland Warranty: 2 years INCLUDING: Controller box + USB cable Polyurethane elastomers: 4 x L=15 mm (installed) | 5 x L=10 mm 1 x steel spring L=51 mm Grounding cable (use only if necessary) Grip strap for brake pedal 4x M6 T-nut (for fastening to aluminum profile) for each pedal + 4x M6-16 screws + washers 2x M4 T-nut for controller box + M4-25 screws Additional washers Clutch is supplied with an optional spring

Read more less

CHARACTERISTICS: Rugged stainless steel construction Convenient dual pedal control and feed accuracy due to double acting pedal arm design Clutch comes with an optional spring Heel can move up/down with foot, resulting in excellent pedal control and feed accuracy Fully adjustable pedal surfaces and heel supports for optimal pedal feel and ergonomics Load cell in all pedals for throttle, brake and clutch Silent operation due to the use of ball bearings and spherical rod ends Maintenance-free: no lubrication required Installation pattern (click to open): 87 mm (lateral) x 80 mm (longitudinal) ⇒ Can be mounted directly on aluminum profiles (minimum 40×120 mm) Adjustable pedal tilt angle +8 / -16 degrees. Super easy and quick adjustment of pedal travel, pedal feel and required actuation force Adjustable max. compression for each polyurethane spring in 1 mm steps 12 bit resolution Calibration software with adjustable dead zones Nonlinear response curves Save to file and load from file for profiles Double shielded USB cable Can be mounted directly to an industry standard 80/20 aluminum profile (min. 40×120 mm or 2 separate profiles) Designed, manufactured and assembled in Finland 🇫🇮. Warranty: 2 years

Read more less

ROLINE power cable Schuko to straight IEC socketROLINE power cable with angled safety plug and IEC socket C13 for connecting computers, printers, monitors or UPS Cable with earthing contact plug and appliance socket (IEC socket) Rated data: 10A, 250V AC Connections: 90° angled earthing contact plug, straight IEC socket Note: Suitable for Germany, Belgium, France

Read more less

ROLINE Apparatus connection cable, IEC 320 C14 - C13 Appliance connection cable with moulded PVC IEC plug and IEC socket in various colors and lengths to match the color of your Simrig Cable with molded PVC appliance plug and socket Rated data: 10A / 250VAC e.g. for monitor power supply via the computer or as an extension for existing cable

Read more less

Sabelt SW1-R Plus Bundle consisting of Sabelt SW1-R Sim-Racing Rim and Ascher B16L-USB Buttonplate. Together, these products offer a complete high-end sim racing wheel for a satisfying driving experience.SPECIAL FEATURES: Maximum ergonomics thanks to the progressive grip areas and design. 6x70 mm bolt circle. Including ashtray B16L-USB buttonplate. WHAT'S INCLUDED: Rim, fasteners, 6 and 10 mm aluminum spacers for paddle shifters, buttonplate.

Read more less

Sabelt SRX-1 Pads KitPad kit filled with 20 mm thick high-density foam, compatible with Sabelt SRX-1 seat and available in 2 colors: Deep Black and Royal Blue.

Read more less

Sabelt SRP-1 Pads KitPad kit filled with 20 mm thick high-density foam, compatible with Sabelt SRP-1 seat and available in 2 colors: Deep Black and Racing Red.

Read more less

O-Rouge OR21 kart rig incl. kart seat The OR21 kart simulator chassis is designed for high performance racers who want the best experience with kart simulation software. The seating position is exactly the same as in a real kart.Designed around the Simucube SC2 Sport and Pro, it offers the best feedback option for kart racers. The pedal plate allows the use of Heusinkveld Sprint or Hydraulic pedals, allowing a realistic distance between both pedals as in a real kart.The pedal tray is equipped with 2 industrial glides that allow easy repositioning of the pedals. The steering column is adjustable in both height and depth and 2 carbon fiber rods ensure maximum rigidity of the steering column.The kart simulator is suitable for people between 110cm and 200cm.On request, we can offer this kart chassis in all RAL colors or apply individual artwork (e.g. team colors). . Steering system and pedals are NOT included in the set.

Read more less

Billet aluminum, black anodized Stainless steel ball bearings in all major pivot points Ultra-smooth running due to the use of ball bearings No lateral play No lubrication required Silent operation due to design No metal-to-metal contact at end stops Mounting: 4 x M6 screws 5 years warranty Designed, manufactured and assembled in Finland

Read more less

 CHARACTERISTICS: Set consists of gas, brake & clutch Billet aluminum with black anodized finish Load cell signal measurement in all pedals (brake: 200 kg) Brake pedal max force from foot: 110 kg Special elastomer in the brake pedal ensures extremely progressive feel and long service life Ball bearings and spherical rod ends in all pivot points: Extremely smooth pedal feeling Silent operation No maintenance or lubrication needed Zero lateral play and extremely rigid Super fast and easy adjustment of the pedal feel without tools Cable length per pedal 35 cm: free positioning from pedal to pedal for optimal ergonomics Calibration software with: adjustable dead zones non-linear response curves Function to save to file and load from file Compact design: 24mm across x 80mm lengthwise. Can be mounted directly to Aluminum profile (40x80 or higher). Mounting with M6 (included) or M5 screws. Pedal can be tilted +/- 8.5 degrees 5 years warranty (2 years commercial) Designed, manufactured and assembled 100% in Finland Video Review by Dan SuzukiSimGrade Thera Review | A super smooth and high quality pedal set - YouTube

Read more less