Pedals

Cube Controls Pedal Set SP01 - GT Version Expand your simulator with the SP01 pedals. This new entry in the Cube Control ecosystem was made to expand your possibilities and give you top performance. The SP01 pedals ensure the highest precision. The smooth and robust gas pedal plate is perfectly matched to the grip of our G+ socks. The brake with its 200-kg load cell provides rock-solid feedback, with multiple springs and rubber damper pressure elements available to combine for the perfect setup. Our proprietary software provides the finishing touches and allows you to convert your setup into a 3-pedal module by adding the upcoming clutch pedal. Main Precision ball bearings with interference fit at ALL pivot points. CNC machined main structure from 6061 and 7075 aluminum Optimized FEM design for a flex-free structure Custom brackets with adjustable angle of the main pedal body in 5° increments Throttle Carbon fiber pedal plate (only in Formula version) Adjustable pedal travel through a special knob on the main shaft Easily accessible adjustment of spring preload Precision machined main shaft with highly wear resistant coating Tolerance-manufactured, self-lubricating nylon sleeve for maximum running smoothness Hall sensor with 16-bit resolution USB-C connection for the main control electronics Brake Custom, lightweight die-cast brake pads with textured handle Option for fine adjustment of spring preload on main pedal and preload ring on pressure elements Precision machined main shaft with highly wear resistant coating Specially designed fully hydraulic damper with 8 preload settings Various springs and rubber dampers available as pressure elements Self-centering springs and damping discs 200kg precision load cell 16-bit resolution

Read more less

Asetek SimSports Pagani Huayra R Sim Racing Pedals Pedals to complete your racing setup The licensed Pagani look invites you to exciting races Pedal feel like a real Pagani Huayra R race car Adjustable pedal travel and required force Aluminum guarantees durability and long-lasting racing fun Integrated RGB lighting Enhance your setup with real Pagani genesTake your racing cockpit to the next level with Asetek SimSports Pagani Huayra R Sim Racing Pedals. Not only do they look like the pedals of a Pagani Huayra R, but they also give you near-real feedback. Just like the real racing bolide.Control your car like a real race driver.Thanks to the adjustment options, you'll always find the perfect seating position for you. With fully adjustable pedal release curves and travel, you can use software to set the perfect throttle and brake response for your car and fight your way to the front. With the unique dual hydraulic cylinder, your 2-stage brake pedal feels like that of a real Pagani race car.With its sturdy aluminum construction, the pedal set can withstand heavier loads in extreme racing situations, giving you distinct and long-lasting driving pleasure.Technical Details:Dimensions (packaging): 212 x 256 x 457 mm (W x H x D).Weight: 3 kgMaterial: Aluminum, PlasticColor: black, goldMaximum pedal pressure: 200 kg (peak 700 kg)Connections: 1x USBSensor resolution: 16 bitPlatform: PCOperating system: Windows 10 and 11Software support: RaceHubScope of delivery:1x Asetek SimSports Pagani Huayra R sim racing pedals.1x USB cable

Read more less

 CHARACTERISTICS: Set consists of gas, brake & clutch Billet aluminum with black anodized finish Load cell signal measurement in all pedals (brake: 200 kg) Brake pedal max force from foot: 110 kg Special elastomer in the brake pedal ensures extremely progressive feel and long service life Ball bearings and spherical rod ends in all pivot points: Extremely smooth pedal feeling Silent operation No maintenance or lubrication needed Zero lateral play and extremely rigid Super fast and easy adjustment of the pedal feel without tools Cable length per pedal 35 cm: free positioning from pedal to pedal for optimal ergonomics Calibration software with: adjustable dead zones non-linear response curves Function to save to file and load from file Compact design: 24mm across x 80mm lengthwise. Can be mounted directly to Aluminum profile (40x80 or higher). Mounting with M6 (included) or M5 screws. Pedal can be tilted +/- 8.5 degrees 5 years warranty (2 years commercial) Designed, manufactured and assembled 100% in Finland Video Review by Dan SuzukiSimGrade Thera Review | A super smooth and high quality pedal set - YouTube

Read more less

CHARACTERISTICS: Rugged stainless steel construction Virtually double pedal control and feed accuracy due to double action pedal arm design Heel can move up/down with the foot, resulting in excellent pedal control and advance accuracy Fully adjustable pedal surfaces and heel supports for optimal pedal feel and ergonomics Load cell in all pedals for throttle, brake and clutch Brake: 200 kg load cell / maximum load through the foot: 100 kg Silent operation due to the use of ball bearings and spherical rod ends Maintenance free: no lubrication required Installation pattern (click to open): 87 mm (lateral) x 80 mm (longitudinal) ⇒ Can be mounted directly on aluminum profiles (minimum 40×120 mm) Adjustable pedal tilt angle +8 / -16 degrees. Super easy and quick adjustment of pedal travel, pedal feel and required actuation force Adjustable max. compression for each polyurethane spring in 1 mm increments Adjustable brake travel limiter (does not limit load, only travel) 12 bit resolution Calibration software with adjustable dead zones Non-linear response curves Save to file and load from file for profiles Pedal-to-controller box cable lengths: Brake 35 cm, Throttle 25 cm Double shielded USB cable Controller box equipped with mounting holes (M4) Can be mounted directly to an industry standard 80/20 aluminum profile (min. 40×120 mm or 2 separate profiles) Designed, manufactured and assembled in Finland Warranty: 2 years INCLUDING: Controller box + USB cable Polyurethane elastomers: 4 x L=15 mm (installed) | 5 x L=10 mm 1 x steel spring L=51 mm Grounding cable (use only if necessary) Grip strap for brake pedal 4x M6 T-nut (for fastening to aluminum profile) for each pedal + 4x M6-16 screws + washers 2x M4 T-nut for controller box + M4-25 screws Additional washers Clutch is supplied with an optional spring

Read more less

CHARACTERISTICS: Rugged stainless steel construction Virtually double pedal control and feed accuracy due to double action pedal arm design The heel can move up/down with the foot, resulting in excellent pedal control and advance accuracy Fully adjustable pedal surfaces and heel supports for optimal pedal feel and ergonomics Load cell in all pedals for throttle, brake and clutch Brake: 200 kg load cell / maximum load through the foot: 100 kg Silent operation due to the use of ball bearings and spherical rod ends Maintenance free: no lubrication required Installation pattern (click to open): 87 mm (lateral) x 80 mm (longitudinal) ⇒ Can be mounted directly on aluminum profiles (minimum 40×120 mm) Adjustable pedal tilt angle +8 / -16 degrees. Super easy and quick adjustment of pedal travel, pedal feel and required actuation force Adjustable max. compression for each polyurethane spring in 1 mm increments Adjustable brake travel limiter (does not limit load, only travel) 12 bit resolution Calibration software with adjustable dead zones Non-linear response curves Save to file and load from file for profiles Pedal-to-controller box cable lengths: Brake 35 cm, Throttle 25 cm Double shielded USB cable Controller box equipped with mounting holes (M4) Can be mounted directly to an industry standard 80/20 aluminum profile (min. 40×120 mm or 2 separate profiles) Designed, manufactured and assembled in Finland 🇫🇮. Warranty: 2 years   INCLUDING: Controller box + USB cable Polyurethane elastomers: 4 x L=15 mm (installed) | 5 x L=10 mm 1 x steel spring L=51 mm Grounding cable (use only if necessary) Grip strap for brake pedal 4x M6 T-nut (for fastening to aluminum profile) for each pedal + 4x M6-16 screws + washers 2x M4 T-nut for controller box + M4-25 screws Additional washers  

Read more less

CHARACTERISTICS: Rugged stainless steel construction Convenient dual pedal control and feed accuracy due to double acting pedal arm design Clutch comes with an optional spring Heel can move up/down with foot, resulting in excellent pedal control and feed accuracy Fully adjustable pedal surfaces and heel supports for optimal pedal feel and ergonomics Load cell in all pedals for throttle, brake and clutch Silent operation due to the use of ball bearings and spherical rod ends Maintenance-free: no lubrication required Installation pattern (click to open): 87 mm (lateral) x 80 mm (longitudinal) ⇒ Can be mounted directly on aluminum profiles (minimum 40×120 mm) Adjustable pedal tilt angle +8 / -16 degrees. Super easy and quick adjustment of pedal travel, pedal feel and required actuation force Adjustable max. compression for each polyurethane spring in 1 mm steps 12 bit resolution Calibration software with adjustable dead zones Nonlinear response curves Save to file and load from file for profiles Double shielded USB cable Can be mounted directly to an industry standard 80/20 aluminum profile (min. 40×120 mm or 2 separate profiles) Designed, manufactured and assembled in Finland 🇫🇮. Warranty: 2 years

Read more less

Billet aluminum, black anodized Stainless steel ball bearings in all major pivot points Ultra-smooth running due to the use of ball bearings No lateral play No lubrication required Silent operation due to design No metal-to-metal contact at end stops Mounting: 4 x M6 screws 5 years warranty Designed, manufactured and assembled in Finland

Read more less