Rigs & Seats

Steel bracket with lettering "O-Rouge

Read more less

PRO SIMRIG Monitor Stand Single Monitor from 32.5", blackPRO SIMRIG monitor stands are built to stand separately from the rig. This stand is for a single monitor.Separate monitor stands (that are not connected to the rig) avoid vibrations coming from the rig. This is especially important when using a direct drive Wheelbase.The monitor stand is flexible and can be adjusted in height and width to suit your needs.For monitors from 32" monitors: (heavy version) recommendedVesa 100: including vesa 50/75/100 drill image plateVesa mounts included? YesScrews and nuts included? YesCan I upgrade to triple monitors at a later date? YesDoes your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this kit (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Check out the adjustable feet for monitor stands hereDIMENSIONSHeight: 1280mm (post + feet)Width: 1200mm (horizontal bar)With 40x80 horizontal bar and feetNo monitor included, picture is for illustration purposes only

Read more less

PRO SIMRIG Monitor Stand Triple Monitor, blackPRO SIMRIG monitor stands are built to stand independently of the simulation rig.The advantage of a free-standing monitor stand (not connected to the rig itself) is that it avoids the vibrations that come from steering wheel and pedal inputs. This can be especially noticeable when using a direct-drive wheelbase.Up to 32" monitors: Light version recommended (important note: Samsung G7 32" should use the Heavy version)32.5"+ monitors: Heavy version recommended Vesa 100: includes Vesa 50/75/100 drill pattern platesVesa mounts included? YesScrews and nuts included? YesDoes your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this set (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Take a look at the adjustable feet for monitor stands hereDIMENSIONS Light: Height: 1240mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 500mm Has 40x40 horizontal bar, arms and feet Heavy: Height: 1280mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 580mm Has 40x80 horizontal bar, arms and feet Note: The monitors are for illustration purposes only

Read more less

The seat shifter can be used in combination with the seat holder. The width of the seat slider can be adjusted to the desired width by slightly bending the middle tie rod. This allows the seat slider to be made to fit all side-mounted bucket seats.Adjustment range of the slider: 23cm

Read more less

PRO SIMRIG Monitor VESA Mounting Bolt and Spacer KitThis kit is suitable for PRO SIMRIG VESA mounts and most common monitor setups.It is becoming more common for monitors to have a deep recess where the standard monitor mount sits. This looks great and makes for a nice flush finish, but it does mean that it can be difficult to fit aftermarket VESA mounts.With this kit, you can screw through the PRO SIMRIG VESA mounts, overcome most notches with the 8mm spacer, and bolt it to the back of the monitor.Kit includes:4 x M4 16mm screw4 x M4 8mm brass spacers1 Set required per Vesa mount/monitor (i.e. if you have a triple monitor stand, order 3 sets).*Please note: While we have found this combination to work well for most monitors we have dealt with, not every monitor is the same and different screws and spacers may be required to attach your monitor to the VESA mount. If you need help with this, please contact us.

Read more less

Sim racers and professional eSport athletes often sweat during long training sessions and races. This is not only an unpleasant feeling, but often the seating position is no longer optimal, dehydration occurs and concentration and performance drops.In the long run, sweating also leads to additional wear and tear on the seat and possibly to unpleasant odors.Our system ventilates certain areas of the chair and dissipates body heat to increase comfort and performance.Features:- High quality fiberglass structure with glossy black outer      coating.- Comfortable padding for maximum comfort with excellent fit- Removable seat cushion- High level of comfort thanks to the raised back and leg restsSeat in monolithic construction: Padded in velvet material Shell shape made of high strength fiberglass reinforced plastic 4 belt slots Stitched logo 4 blowers to ventilate the back and bottom zone in combination with a special 3D fabric. This seat is NOT FIA approved and can be used for gaming purposes onlySeat mounts NOT included! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

PRO SIMRIG upgrade Kit Single- to Tripple-Monitorstand If you have started with a single PRO SIMRIG Monitor Stand and later want to change it to a triple Monitor Stand , you can add this add-on kit.You can choose between a light or a heavy version depending on your single monitor stand.Light = 40x40Heavy = 40x80Complete kit for mounting the upgrade kit to the single monitor stand is included. Vesa mounts, bolts and nuts also included.Have a different brand monitor stand?This kit may also fit other brands. 40x40 or 40x80 single monitor stands should allow you to upgrade to triples. Your center bar will need to be at least 100cm long for 27" screens, or 120cm long for 32" screens (120cm 40x40 and 40x80 bars are available in the DIY Parts section). If you are in any doubt whether this upgrade kit will fit your monitor stand, please contact us and we will help.

Read more less

PRO SIMRIG Seat XL Nordschleife by Cobra Motorsport Extra large (XL) sim racing seat Designed for larger drivers Steel construction with solid back for maximum strength Breathable fabric High quality materials and workmanship Made especially for larger drivers!Sim racers come in all shapes and sizes. This seat is suitable for drivers who are either taller, wider in the middle or wider at the shoulders (or a combination of these 3 factors).The Nordschleife is generous in all proportions without losing the benefits of a fixed rear seat.Before this seat, taller drivers really only had 2 options. 1) buy a really expensive seat that accommodates XL sizes, 2) use an adjustable "armchair" seat, or 3) retrofit a car seat.None of these options offer what most sim racers are looking for: a sturdy seat with a firm back at an affordable price that doesn't compromise on performance. This is where the PRO SIMRIG Nordschleife XL sim racing seat from Cobra Motorsport comes into play. Tested by tall riders: 190cmTested by tall riders: 127cm waist (at belt height)Tested by wide riders: (very wide in the shoulder area) Outside to outside of shoulder 560mm Inside to inside of back section (without shoulders) 346mm Height from base to top of head rest 885mm Width across base of seat (at the back) 360mm Width across base of seat (at the front) 385mm (without padding compression) Back to front measurement (before the thigh roll) 340mm NOT HOMOLOGATED FOR STREET OR RACE TRACK USE! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

PRO SIMRIG Monitor Stand Single Monitor up to 32", black PRO SIMRIG monitor stands are built to stand separately from the rig. This stand is for a single monitor.Separate monitor stands (that are not connected to the rig) avoid vibrations coming from the rig. This is especially important when using a direct drive Wheelbase.The monitor stand is flexible and can be adjusted in height and width to suit your needs.Up to 32" monitors: light version recommendedVesa 100: includes vesa 50/75/100 drilling pattern plateVesa brackets included? YesScrews and nuts included? YesCan I upgrade to triple monitors at a later date? Yes Does your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this kit (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Check out the adjustable feet for monitor stands hereDIMENSIONSHeight: 1240mm (stand + feet)Width: 1200mm (horizontal bar)Has 40x40 horizontal bar and feetNo monitor included, picture is for illustration purposes only  

Read more less

O-Rouge seat C1 Cold Fusion XL with EU plug-in power supplyThe ideal offer for those looking for a comfortable racing seat in a modern design with an aggressive look and top performance! This seat has a ventilated back and bottom zone and directs hot air away from your body.- 4 fans to ventilate the back and bottom zone combined with a special 3D fabricSeat can only be used for gaming!Seat support not included.You want to try out the seat in action, then drop by Tango-Racing in Vienna:Before you order the seat, please note the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

This seat is made of reinforced polyester - glass, is characterized by high strength, ensuring thus a comfortable use.Thanks to the low seating position, the driver has the best seating position during the race in all conditions. The seat is made of black velor and offers a very sporty look and amazing comfort thanks to the removable lumbar and leg rests.Seat in monolithic construction:- Upholstered in velvet material- Shell shape made of high-strength glass fiber reinforced plastic- 4 belt slots- Stitched logoNOT HOMOLOGATED FOR STREET OR RACE TRACK USE! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

PRO SIMRIG Top Monitor StandA PRO SIMRIG top monitor stand that can be attached to both single and triple monitor stands.A complete kit for mounting the top screen monitor stand to the single or triple monitor stands is included.Vesa mount, screws and nuts are also included (to attach the Vesa mount to the monitor stand).If you need mounting hardware for your monitor (to attach your monitor to the Vesa mount), please purchase this set (one per monitor).

Read more less