Accessories for Simrigs

Gude 8112-4 Expert Power Sequencer 6x safety socket with surge protection and mains filter Increased operational reliability through sequential switching of 6 consumers The Expert Power Sequencer 8112 series enables automatic switching of up to 6 electrical devices.The devices connected to the load outputs can be switched on sequentially and switched off in reverse order using an automatic switching routine. The switching sequence is triggered by pressing the switch on the front of the 19-inch device. The individual power ports are switched on one after the other with a delay of 3 seconds each. This time interval can be adjusted individually for each load output. Performance features 6 power ports can be switched in a controlled switching sequence using the switch on the device or an external button Sequential switching on and off of connected loads with a delay of 3 seconds between adjacent outputs Delay intervals between the individual switching operations can be set individually Prevents current peaks during simultaneous switching operations (high inrush) and tripping of upstream fuses Integrated type 3 surge protection (according to EN61643-1) prevents damage to the device and connected consumers Jack connection allows connection of external switches and I/O contacts and enables remote control of the switching routine Integrated mains filter prevents interference currents and thus eliminates signal quality losses in connected devices such as loudspeakers, amplifiers, and projectors Connections and dimensions 1 mains connection with type E/F safety contact (CEE 7/7, max. 16 A, 230 V)6 load outputs 6 x protective contact type F, CEE 7/3 (max. 16 A) 19 inches, 1 UWxHxD: 43.9 x 4.4 x 11.2 cm (without mounting brackets)Weight: approx. 2.1 kgCable length: 2 mOperating temperature: 0-50 °CStorage temperature: -20 - 70 °CRelative humidity: 0 - 95 % (non-condensing)

Read more less

Asetek Initium Rig - Monitor Mount Perfect your racing setup with the Initium monitor mount—the perfect way to bring the action to you.Sturdy steel construction—no bending or wobbling during intense races.Bring the action closer and feel like you're really sitting behind the windshield.Compatibility: Initium 2-in-1 cockpitMaterial: Black powder-coated Q235 steelWheelbase to center of monitor mount: Min.: 185 mm (7 inches), Max.: 245 mm (10 inches)Mounting compatibility: 75 × 75 or 100 × 100 mm mounting holes on the backDimensions (adjustable): 496 × 228 × 142 mm (19.5 × 9 × 5.6 inches)Mount adjustability: Height, monitor tilt, monitor mount tilt: Angle (monitor mount): 60°, Angle (monitor mount): 30°

Read more less

Sabelt Keyboard Tray BMWhen combined with the articulated side mount (00107-02-00), this accessory offers maximum versatility when using the keyboard, which can be positioned on the outside or in front of the seat while driving to ensure more comfortable use.SCOPE OF DELIVERY: Aluminum profile, steel plate, end caps, mounting parts, and screws.HIGHLIGHTS:Anodized aluminum profiles with Zero-X technology.Powder-coated 5 mm thick CNC aluminum plate.Maximum versatility and ease of use.

Read more less

Fanatec ClubSport GT Cockpit Seat - whiteThe Fanatec ClubSport GT Cockpit Seat is a high-quality bucket seat designed specifically for the ClubSport GT Cockpit. With its robust construction and breathable cover, it offers optimal comfort and stability for long sim racing sessions. Fiber-reinforced plastic shell for high rigidity and low weight Breathable fabric cover with padding for maximum comfort 290 mm mounting pattern for easy installation on the GT Cockpit Ergonomic design with integrated lumbar support Only compatible with the Fanatec ClubSport GT Cockpit With the standardized 290 mm mounting pattern, the seat can be easily mounted on the Fanatec ClubSport GT Cockpit. The precise fit ensures a secure and stable connection between the seat and the cockpit.

Read more less

 PRO SIMRIG P-APS Holder Brackets (Pair) Slot-8 Easily attach your SIMAGIC Accessories Power Supply (P-APS) to your aluminium cockpit.Simply twist in the profile slot and push the power supply through.Note, the twist action only works one way (by design), do not force it to go the other direction. If you want to change the orientation, remove the bracket from the slot and flip 180 degrees and twist again.Price is for a pair of brackets (2) in blackNote: this product is a 3D printed part. It may have some small surface imperfections. This does not affect the function of the part. The design has been optimized and is printed to tight tolerances using high quality materials. This product will sustain normal UV exposure and normal room temperatures as well as normal PSU temperatures.

Read more less

PRO SIMRIG Brackets for Simagic Control Box (Pair) Easily attach your SIMAGIC Control Box to your aluminium cockpit.Simply twist in the profile slot and push the power supply through.Note, the twist action only works one way (by design), do not force it to go the other direction. If you want to change the orientation, remove the bracket from the slot and flip 180 degrees and twist again.Price is for a pair of brackets (2) in black.Note: this product is a 3D printed part. It may have some small surface imperfections. This does not affect the function of the part. The design has been optimized and is printed to tight tolerances using high quality materials. This product will sustain normal UV exposure and normal room temperatures as well as normal PSU temperatures.

Read more less

Sabelt Freestanding Triple Monitor Add On This add on kit allows to transform the Freestanding Single Monitor Stand in triple thanks to the addition of the 2 side profiles and related mounting accessories.WHAT’S INCLUDED: aluminum profiles, aluminum plates, end caps, 2 75/100 vesa supports, fixing parts and screws.HIGHLIGHTS:Aluminum profiles anodized with Zero-X technology.Height, depth and angle adjustment.Compatible with 16:9 (up to 32’’) monitors.Freestanding Single Monitor Stand (00105-01-00) required.

Read more less

Sabelt Side Mount Black Thanks to the side bracket, it is possible to mount various accessories on the rig, such as the mouse plate or the shifter plate. Thanks to the mounting plate supplied, the bracket can be installed on the right-hand side of the cockpit.Scope of delivery: Aluminum profile, double side plates, end caps, mounting parts and screws.HIGHLIGHTS: Anodized aluminium profile with Zero-X technology. Powder-coated 10 mm thick CNC aluminum plates. Mounting on the right and left side.

Read more less

Sabelt Triple Monitor Direct Mount Black Für ein noch intensiveres Fahrerlebnis ist es dank der Triple Monitor Direct Mount möglich, drei Monitore in die Cockpits zu integrieren und deren Höhe, Tiefe und Neigung einzustellen. Lieferumfang: Aluminiumprofile, Aluminiumplatten, Endkappen, 3 vesa 75/100 Halterungen, Befestigungsteile und Schrauben. HIGHLIGHTS: Eloxierte Aluminiumprofile mit Zero-X Technologie. Pulverbeschichtete 10 mm dicke CNC-Aluminiumplatten. Höhen-, Tiefen- und Winkelverstellung. Kompatibel mit 16:9-Monitoren (bis zu 32'').

Read more less

Single Monitor Direct Mount black Dank des Designs der 10 mm dicken CNC-Seitenplatten fügt sich der Single Monitor Direct Mount perfekt in das Design der Cockpits ein und ermöglicht die Installation und Einstellung in Höhe, Tiefe und Neigung eines einzelnen Monitors. Lieferumfang: Aluminiumprofile, Aluminiumplatten, Endkappen, vesa 75/100 Halterung, Befestigungsteile und Schrauben. HIGHLIGHTS: Eloxierte Aluminiumprofile mit Zero-X Technologie. Pulverbeschichtete 10 mm dicke CNC-Aluminiumplatten. Höhen-, Tiefen- und Winkelverstellung. Kompatibel mit 16:9 (bis zu 32''), 21:9 (bis zu 38'') oder 32:9 (bis zu 49'') Monitoren.

Read more less

Ultra Pedal Mount Black Übernehmen Sie die Kontrolle mit der Ultra Pedal Mount! Erreichen Sie Ihr ideales Pedalsetup mit unendlichen Einstellmöglichkeiten. Die auf Vielseitigkeit ausgelegte Halterung kann in verschiedenen Höhen im Cockpit positioniert werden und passt sich so nahtlos an jeden Fahrstil an. Die optionale Pedal Heel Rest Plate bietet eine Höhenverstellung von bis zu 30 mm, während der Verstellbereich von 140 mm (kompatibel mit S99-, P99- und X99-Cockpits) eine perfekte Anpassung für jeden Fahrer gewährleistet. Erleben Sie Präzision und Komfort wie nie zuvor! WAS ENTHALTEN IST: Aluminiumprofile, Aluminiumplatten, Befestigungsteile und Schrauben. NICHT ENTHALTEN: Pedal-Fersenstützenplatte. HIGHLIGHTS: Eloxierte Aluminiumprofile mit Zero-X-Technologie. Maximale Steifigkeit und Verwindungsfreiheit dank der 80x40 und 40x40 Profile und der 10 mm dicken CNC-Seitenplatten. Maximale Flexibilität bei der Einstellung für jeden Fahrstil. Höhen-, Tiefen- und Winkelverstellung.

Read more less

Sabelt Keyboard Pocket This functional Keyboard Pocket made of 3 mm thick bent steel allows you to optimize space; it can be mounted in various places on the rig, both in the side and top slots of the profiles.Powder-coated 3 mm thick steel plate with matt black Sabelt print.Various mounting options.COMPATIBLE WITH THE SERIES: P | S | XWHAT'S INCLUDED: Laser-cut steel plate, mounting parts and screws.

Read more less