Products

PRO SIMRIG PSR1 & PSR3 bottom mounted pedals mounting kit This kit is required for bottom-mounted pedals, e.g. for the Thrustmaster T-LCM. It is suitable for both the PRO SIMRIG PSR1 and the PRO SIMRIG PSR3.Contains: 4 x 40x40 Angle Brackets (Black) 4 x M8 T-slot nut 4 x M8x16 mm cap screw 4 x M6x16 mm button head screw 4 x M6x20 mm button head screw

Read more less

PRO SIMRIG PSR1 black baseThe PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a base rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base section, seat rails, a vertical section, a wheelbase section (wheelbase bracket not included) and a pedal section with adjustable pedal plate.All parts like angles, screws, nuts etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.

Read more less

PRO SIMRIG PSR1 black with front wheelbase mountThe PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a base rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base section, seat rails, a vertical section, a wheelbase section, the front wheelbase posture and a pedal section with adjustable pedal plate.All parts such as brackets, screws, nuts, etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.Supported Wheelbases: Simagic Alpha U / Simagic Alpha / Simagic Mini+ Simucube 2 Sport / Pro / Ultimate Fanatec CSL DD / DD Pro (with optional Boost Kit) / CSW.  Fanatec Clubsport DD and DD+ Fanatec DD1 / DD2 Moza R5 - requires “R5 40mm to 66mm 4-hole adapter plate” from Moza Moza R9 / Moza R12 / Moza R16 / R21 All Thrustmaster / Logitech VRS Direct Force Pro All Asetek - requires Asetek Floor Mount, combined with the PSR1 Misc. mount, or take the PSR1 No Wheel Bracket option and use the Asetek Side Mount + many more

Read more less

PRO SIMRIG PSR1 black with side wheelbase mount (DD1,DD2)The PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a basic rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base section, seat rails, a vertical section, a wheelbase section, the side wheelbase posture and a pedal section with adjustable pedal plate.All parts such as brackets, screws, nuts, etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.Supported Wheelbases: Fanatec DD1 Fanatec DD2 Fanatec CSL DD Fanatec DD Pro CSL DD/DD Pro/DD1/DD2 Bracket

Read more less

PRO SIMRIG PSR1 black with Wheelbase mount universalThe PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a basic rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base part, seat rails, a vertical part, a wheelbase part, the universal wheelbase posture and a pedal part with adjustable pedal plate.All parts such as brackets, screws, nuts, etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.Supported Wheelbases: Logitech Driving Force wheels (G29, G920) Thrustmaster steering wheels (T300 etc.) Fanatec CSW (V2.5 etc.) Fanatec DD1 (mounted below) Fanatec DD2 (bottom mounted) Fanatec CSL DD (bottom mounted) Fanatec DD Pro (bottom mounted) SIMAGIC M10 (with SIMAGIC side mounts) Moza R9 / R16 / R21 (using Moza mounting plates - the 4-to-3 hole adapter) Other Wheelbases that mount from the bottom, or that come with 90-degree brackets that allow mounting from the bottom

Read more less

PRO SIMRIG PSR3 blackNot all rigs are created equal. The thought process behind the PSR3 was "how do we squeeze this much stiffness out of a value-oriented cockpit without losing adjustability".The PSR3 is blessed with the same heavy-duty profiles used on the PSR1. Significantly thicker sidewalls provide more mass, more weight and more stiffness than the competition.On the steering knuckles, the steering area is overlapped. This requires more material and costs more, but the result is better anchoring of the steering wheel deck, which is supported by the rig perimeter.As with the PSR1, the wheelbase section is designed to be extremely strong. A 10mm thick aluminum wheel deck is used, connected to profiled and adjustable side plates.The PSR3 has a great pedal section. The design is an evolution of the PSR1, where two 10mm aluminum plates enclose two 80mm profiles mounted with 8 direct mounts. Many riders prefer a very stiff brake setup, and so the PSR3 had to be built with those requirements in mind. Other designs often suffer from flex in the pedal area, primarily due to cost savings in materials and design. BRACED SIDE MOUNT INCLUDED AS STANDARD In keeping with the motto "overlap = strength," the PSR3 features a braced side mount. This reduces lateral movement when shift levers or hand brakes are attached to the side mount. To help you find the perfect height, two different mounting heights allow for 80mm adjustment in 1mm increments. The side mount comes with 1 x 40x80x490mm profile and 1 x 40x40x350mm profile. The side mount can be attached to either the left or right side of the PSR3 cockpit. PSR3 comes standard with an externally braced side mount. PSR3 is designed for the new generation of Direct Drive wheelbases. Compatibility with many wheelbasesThe PSR3 wheel deck was built with mid-range direct drive wheelbases in mind (we consider wheelbases like the Fanatec CSL DD (with boost kit) and Simagic Alpha Mini to be "mid-range" direct drive wheelbases).They are extremely popular due to their mix of price, performance, and strength. The PSR3 was designed specifically for these vehicles.The PSR3 can also handle stronger direct drive motors like Fanatec DD1 and DD2, Simucube 2 and so on. Nevertheless, we recommend the PRO SIMRIG PSR1 if you are running these Wheelbaseswith high torque settings.The bold Wheelbases are recommended for the PSR3. The non-bold Wheelbases are recommended for the PSR1.Pre-drilled holes for floor mounting are available for the following Wheelbases: Fanatec CSL DD / DD Pro (with optional Boost Kit). Fanatec DD1 / DD2 Fanatec CSW Asetek La Prima / Asetek Forte / Asetek Invicta Simagic Alpha / Simagic Alpha Mini Moza R9 / Moza R16 / R21 All Thrustmaster / Logitech Simucube 2 (Sport / Pro) - requires Simucube 90 degree front mount - sold separately WIDE PEDAL COMPATIBILITYIt is common knowledge that the greatest consistency is achieved through the brake pedal. For this reason, the PSR3 is equipped with a pedal deck that offers wide compatibility with the best pedal systems.Compatible pedal systems that use the manufacturer's base plate: Fanatec CSL / CSL (+LC) / V1 / V2 / V3 (+inverted). Venym Atrax Heusinkveld Sim pedals Sprint / Ultimate / Ultimate+ Meca Cup1 / Evo1 BJ Steel Asetek Forte / Invicta Moza S-RP / CRP SimTrecs ProPedal GT SimCoaches P1 / SimCraft PRO / ImSim Talento Requires additional mounting hardware as these pedals mount from the bottom. Need 4 x corner brackets, 8 x T-nuts, 8 x bolts. Very easy to mount. Thrustmaster T-LCM / T3PA / T3PM Logitech (all) Fanatec CSR / CSR Elite Weight: 40kg (2 boxes)Easy to modify and add attachmentsProfile: PRO SIMRIG Ultra Heavy Duty 40x80 and 40x40Color: Black profile, black angle brackets, black angle bracket covers, black and silver screws

Read more less

PRO SIMRIG heavy duty wheels set4 x 50mm red swivel castors + screw setNote: 2 wheels are lockable, 2 wheels are not lockable.Load capacity: 70kg per wheelHeight: 68mmWheel diameter: 50mmThese wheels offer an excellent aesthetic appearance. They are made of polyurethane, which offers excellent wear and abrasion resistance properties, high grip and resistance to many liquids and detergents, while having a high load capacity, as each caster wheel can support up to 70kg per wheel.Bolt set and T-nuts are included. Note that a Spherical head hex key may be required to obtain the proper angle to tighten the bolt from below.

Read more less

PRO SIMRIG side mountThe PRO SIMRIG side mount can be mounted on the side of your PRO SIMRIG PSR1 or other aluminum extrusion.The side mount provides the ability to add a manual shift lever or mouse pad tray, etc.A complete kit for mounting the side mount to the PSR1 rig is included.Compatibility:PRO SIMRIG PSR1Other 40mm profile rigs

Read more less

PRO SIMRIG side wheelbase mountBracket for side mounting your Fanatec CSL DD or DD1 or DD2.Complete kit for mounting the side mount bracket to the PSR1 rig.The bracket is built to include maximum adjustability, so it can take more or less all positions.The brackets are made of 10mm thick aluminum, coated black and are mounted with 40x80 aluminum profiles to maximize strength and avoid any bending.Brackets: always blackProfiles: BlackCan be used with other rig types. Designed for rigs with a distance of 580 mm between supports. If you have any doubts or further questions, please contact us.

Read more less

PRO SIMRIG Seat XL Nordschleife by Cobra Motorsport Extra large (XL) sim racing seat Designed for larger drivers Steel construction with solid back for maximum strength Breathable fabric High quality materials and workmanship Made especially for larger drivers!Sim racers come in all shapes and sizes. This seat is suitable for drivers who are either taller, wider in the middle or wider at the shoulders (or a combination of these 3 factors).The Nordschleife is generous in all proportions without losing the benefits of a fixed rear seat.Before this seat, taller drivers really only had 2 options. 1) buy a really expensive seat that accommodates XL sizes, 2) use an adjustable "armchair" seat, or 3) retrofit a car seat.None of these options offer what most sim racers are looking for: a sturdy seat with a firm back at an affordable price that doesn't compromise on performance. This is where the PRO SIMRIG Nordschleife XL sim racing seat from Cobra Motorsport comes into play. Tested by tall riders: 190cmTested by tall riders: 127cm waist (at belt height)Tested by wide riders: (very wide in the shoulder area) Outside to outside of shoulder 560mm Inside to inside of back section (without shoulders) 346mm Height from base to top of head rest 885mm Width across base of seat (at the back) 360mm Width across base of seat (at the front) 385mm (without padding compression) Back to front measurement (before the thigh roll) 340mm NOT HOMOLOGATED FOR STREET OR RACE TRACK USE! Before you order the seat, please pay attention to the following:Racing seats are narrower than normal seats!We charge a handling fee of 20% for the return of the seat.

Read more less

PRO SIMRIG Slot-In cable clamps 10-packThese cable clamps have the advantage of sliding easily into the aluminum profile (they fit all PRO SIMRIG profiles and other Series 40 Slot 8 profiles). See photos of how they slide into the profile and then twist. Can be used in the vertical position as it fits snugly in the slot.The two-sided cable clamp can be opened and reused with different cables on each side.It has a rubber band inside to secure the cables and a clip on each arm to secure and keep them neat.No glue required.Made of durable black nylon 66 material.Color: BlackPrice is per pack of 10 clips

Read more less

PRO SIMRIG Slotcover 5mFlexible slot covers for aluminum profilesEasy to slide inAvailable colors: black white red blue yellow orange green 5m lengthSuitable for 40x40 Profinut 8For aesthetic purposes or to keep dust out of the ducts!Easy to cut with scissors or craft knife (be careful!)

Read more less