Products

PRO SIMRIG Keyboard Tray Fully adjustable keyboard tray.Complete kit for direct mounting on PSR1 or other aluminum extrusion rig (40 profile) is included.Keyboard tray is made of 4mm thick black coated aluminum.Compatibility: PRO SIMRIG PSR1 Other 40mm profile rigs

Read more less

PRO SIMRIG Top Monitor StandA PRO SIMRIG top monitor stand that can be attached to both single and triple monitor stands.A complete kit for mounting the top screen monitor stand to the single or triple monitor stands is included.Vesa mount, screws and nuts are also included (to attach the Vesa mount to the monitor stand).If you need mounting hardware for your monitor (to attach your monitor to the Vesa mount), please purchase this set (one per monitor).

Read more less

PRO SIMRIG Under TrayAn under tray for the side mount of the PSR1, PSR3 or any other aluminum profile rig. This is useful for storing your phone or other items without cluttering up your mouse compartment!A complete mounting kit for the Under Tray is included (3 x M6x16mm screws & 3 x M6x20mm screws & 3 x M6 T-nuts). You have two different screw lengths depending on whether you are mounting the PRO SIMRIG Mouse Tray or the PRO SIMRIG Mini Tray, or just the Under Tray alone.The tray is made of 4 mm thick aluminum and powder-coated in black.Dimensions (flat deck): 250 x 185 x 4 mmCompatibility: PRO SIMRIG PSR1 / PSR3 PRO SIMRIG mouse tray PRO SIMRIG mini tray Suitable for mounting on other aluminum profile rigs. Photos show other parts/accessories. This offer is only valid for the Under Tray.

Read more less

PRO SIMRIG Universal Heel Rest This universal heel support from PRO SIMRIG is a useful addition for any setup where the pedals are not supplied with a special base plate, or if you need to bolt your pedals to an aluminum profile.

Read more less

PRO SIMRIG Universal HolderThe Universal Holder is an inexpensive, versatile holder that can be used for a variety of things, including (but not limited to!): Button bar mount Headphone holder Steering wheel mount Webcam mount Bracket for key light Pre-drilled with M8 holes at both ends and 3 holes in the center for attaching attachments that need to be permanently mounted.Supplied as standard with 2 x M8 bolts, 2 x M8 washers and 2 x M8 slot nuts.Manufactured from 3mm thick carbon steel, powder coated in matt black.Dimensions: Inner length (distance between both ends) 130mm. Width (widest point) 80mm Width (narrowest point) 40mm Note: Profile, headphones and webcam are not included.

Read more less

PRO SIMRIG upgrade Kit Single- to Tripple-Monitorstand If you have started with a single PRO SIMRIG Monitor Stand and later want to change it to a triple Monitor Stand , you can add this add-on kit.You can choose between a light or a heavy version depending on your single monitor stand.Light = 40x40Heavy = 40x80Complete kit for mounting the upgrade kit to the single monitor stand is included. Vesa mounts, bolts and nuts also included.Have a different brand monitor stand?This kit may also fit other brands. 40x40 or 40x80 single monitor stands should allow you to upgrade to triples. Your center bar will need to be at least 100cm long for 27" screens, or 120cm long for 32" screens (120cm 40x40 and 40x80 bars are available in the DIY Parts section). If you are in any doubt whether this upgrade kit will fit your monitor stand, please contact us and we will help.

Read more less

PRO SIMRIG adjustable feet for monitor standIf you have an uneven floor, these adjustable feet can be added to level the monitor stand.A complete kit for mounting the feet to the monitor stand is included. The brackets are made of 10 mm thick black coated aluminum. The main bolts are M12 (12mm).The price is for a complete set of monitor stand feet. 4 feet, 4 brackets, screws, T-nuts and nuts.

Read more less

PRO SIMRIG Wheelbase mount universalThe bracket is suitable for mounting many different top-mounted wheelbases, such as Fanatec, Thrustmaster, Logitech, AccuForce, etc.Compatibility: Logitech Driving Force steering wheels (G29, G920). Thrustmaster steering wheels (T300 etc.) Fanatec CSW (V2.5 etc.) Fanatec DD1 (mounted below) Fanatec DD2 (bottom mounted) Fanatec CSL DD (bottom mounted) (new) SIMAGIC M10 (with SIMAGIC side mounts) Moza R16 / R21 (using Moza mounting plates) Other bottom mounted Wheelbases supplied with 90 degree brackets for bottom mounting Complete kit for mounting the bracket to the PSR1 rig. The mount is designed to provide maximum flexibility and is adjustable to take more or less any position.The brackets are made of 15mm aluminum and coated black. The side mounts are made of 10mm aluminum, black coated.Wheelbase mount and side mounts are mounted together with 40x80 aluminum extrusions to maximize strength and prevent any flexing, even when a Fanatec DD1 or DD2 is mounted on it.Can also be used with other rig types. Designed for rigs with a distance of 580 mm between supports. If you have any doubts or further questions, please contact us.

Read more less

QS-BT1: Installation kit for Next Level Racing® Motion Platform V3 The QS-BT1 to Next Level Racing® Motion Platform V3 Installation Kit is a solution for connecting the QS-BT1 to the Next Level Racing® Motion Platform V3. Designed for quick installation and stable connection between motion platform and belt tensioner QS-BT1. Whether you’re configuring new equipment or upgrading existing components, this bracket ensures an easy and hassle-free installation process.

Read more less

Qubic System QS-210 3DoF Motion System The QS-210 3DoF motion system is designed as a more compact iteration of the Qubic System QS-220 industrial-grade linear actuators. This 3DoF motion set is linear, efficient, easy to connect, and requires no maintenance. The motion system shares the same features as the linear actuators utilized in Qubic System motion cockpits, particularly the attributes of low latency time and real-time vibrations. Tailored for dedicated sim racers and drivers, the QS-210 motion system includes additional sets of brackets that enable racers to install actuators in the most popular aluminum profile based cockpits available on the global market.QS-210 – 3DOF SET HighlightsMaximum velocity: 400 mm/s per actuatorMaximum acceleration: 0.6 GActuator stroke: 60 mm | 2.36 inLatency: <8 msMaximum control frequency: 1000 HzVibration frequency range: 0-100 HzQS-210 – SET KEY FEATURES Home package – industrial grade performance into your home motion set. Compact design and extremely quiet operation Incredible realism of car acceleration One common environment – all in one Qubic Manager application VR HeadWay technology support (VR sickness compensation) Over 80+ integrated and supported racing games Proudly made in EU: Engineered, Designed and Manufactured in Poland

Read more less

Qubic System QS-210 acturators (2 pcs) Multipurpose linear actuators set compatible with QS-CH1, QS-CH2 and most aluminium profile based cockpits available on the global market (using brackets).Actuator stroke of 6cm / 2.36in. Contains:- 2x actuator (QS-L5) with stabilization plate- 1x power cabinet (QS-SB2)- Set of cables- Set of screws- 2x bracket for QS-L5 actuator (QS-210)

Read more less

Qubic System QS-220 3DoF Motion System Maximum velocity: 800 mm/s/per actuatorMaximum acceleration: 0.8 GActuator stroke: 100 mm | 3,93 inLatency: <8 msMaximum control frequency: 1000 HzVibration frequency range: 0-100 HzQS-220 – SET KEY FEATURES Super silent – extremely quiet operation Used by professional race car drivers and pilots around the world Top quality ecosystem for personal and commercial applications Supported by dedicated software QubicManager: motion adjustment, motion post-processing, extensive diagnostic or easy and fast use of predefined profiles VR HeadWay technology support (VR sickness compensation) Over 80+ integrated and supported racing and flight games Compatible with professional simulation applications – Motion SDK (FSMI or FSDI) for software developers Proudly made in EU: Engineered, Designed and Manufactured in Poland

Read more less