PRO SIMRIG

PRO SIMRIG PSR3 blackNot all rigs are created equal. The thought process behind the PSR3 was "how do we squeeze this much stiffness out of a value-oriented cockpit without losing adjustability".The PSR3 is blessed with the same heavy-duty profiles used on the PSR1. Significantly thicker sidewalls provide more mass, more weight and more stiffness than the competition.On the steering knuckles, the steering area is overlapped. This requires more material and costs more, but the result is better anchoring of the steering wheel deck, which is supported by the rig perimeter.As with the PSR1, the wheelbase section is designed to be extremely strong. A 10mm thick aluminum wheel deck is used, connected to profiled and adjustable side plates.The PSR3 has a great pedal section. The design is an evolution of the PSR1, where two 10mm aluminum plates enclose two 80mm profiles mounted with 8 direct mounts. Many riders prefer a very stiff brake setup, and so the PSR3 had to be built with those requirements in mind. Other designs often suffer from flex in the pedal area, primarily due to cost savings in materials and design. BRACED SIDE MOUNT INCLUDED AS STANDARD In keeping with the motto "overlap = strength," the PSR3 features a braced side mount. This reduces lateral movement when shift levers or hand brakes are attached to the side mount. To help you find the perfect height, two different mounting heights allow for 80mm adjustment in 1mm increments. The side mount comes with 1 x 40x80x490mm profile and 1 x 40x40x350mm profile. The side mount can be attached to either the left or right side of the PSR3 cockpit. PSR3 comes standard with an externally braced side mount. PSR3 is designed for the new generation of Direct Drive wheelbases. Compatibility with many wheelbasesThe PSR3 wheel deck was built with mid-range direct drive wheelbases in mind (we consider wheelbases like the Fanatec CSL DD (with boost kit) and Simagic Alpha Mini to be "mid-range" direct drive wheelbases).They are extremely popular due to their mix of price, performance, and strength. The PSR3 was designed specifically for these vehicles.The PSR3 can also handle stronger direct drive motors like Fanatec DD1 and DD2, Simucube 2 and so on. Nevertheless, we recommend the PRO SIMRIG PSR1 if you are running these Wheelbaseswith high torque settings.The bold Wheelbases are recommended for the PSR3. The non-bold Wheelbases are recommended for the PSR1.Pre-drilled holes for floor mounting are available for the following Wheelbases: Fanatec CSL DD / DD Pro (with optional Boost Kit). Fanatec DD1 / DD2 Fanatec CSW Asetek La Prima / Asetek Forte / Asetek Invicta Simagic Alpha / Simagic Alpha Mini Moza R9 / Moza R16 / R21 All Thrustmaster / Logitech Simucube 2 (Sport / Pro) - requires Simucube 90 degree front mount - sold separately WIDE PEDAL COMPATIBILITYIt is common knowledge that the greatest consistency is achieved through the brake pedal. For this reason, the PSR3 is equipped with a pedal deck that offers wide compatibility with the best pedal systems.Compatible pedal systems that use the manufacturer's base plate: Fanatec CSL / CSL (+LC) / V1 / V2 / V3 (+inverted). Venym Atrax Heusinkveld Sim pedals Sprint / Ultimate / Ultimate+ Meca Cup1 / Evo1 BJ Steel Asetek Forte / Invicta Moza S-RP / CRP SimTrecs ProPedal GT SimCoaches P1 / SimCraft PRO / ImSim Talento Requires additional mounting hardware as these pedals mount from the bottom. Need 4 x corner brackets, 8 x T-nuts, 8 x bolts. Very easy to mount. Thrustmaster T-LCM / T3PA / T3PM Logitech (all) Fanatec CSR / CSR Elite Weight: 40kg (2 boxes)Easy to modify and add attachmentsProfile: PRO SIMRIG Ultra Heavy Duty 40x80 and 40x40Color: Black profile, black angle brackets, black angle bracket covers, black and silver screws

Read more less

PRO SIMRIG Slot-In cable clamps 10-packThese cable clamps have the advantage of sliding easily into the aluminum profile (they fit all PRO SIMRIG profiles and other Series 40 Slot 8 profiles). See photos of how they slide into the profile and then twist. Can be used in the vertical position as it fits snugly in the slot.The two-sided cable clamp can be opened and reused with different cables on each side.It has a rubber band inside to secure the cables and a clip on each arm to secure and keep them neat.No glue required.Made of durable black nylon 66 material.Color: BlackPrice is per pack of 10 clips

Read more less

PRO SIMRIG Slotcover 5mFlexible slot covers for aluminum profilesEasy to slide inAvailable colors: black white red blue yellow orange green 5m lengthSuitable for 40x40 Profinut 8For aesthetic purposes or to keep dust out of the ducts!Easy to cut with scissors or craft knife (be careful!)

Read more less

PRO SIMRIG Keyboard Tray Fully adjustable keyboard tray.Complete kit for direct mounting on PSR1 or other aluminum extrusion rig (40 profile) is included.Keyboard tray is made of 4mm thick black coated aluminum.Compatibility: PRO SIMRIG PSR1 Other 40mm profile rigs

Read more less

PRO SIMRIG 4mm steel seat side brackets The PRO SIMRIG seat side brackets are used for mounting side-mounted seats. They are screwed to the side of the seat and either screwed directly to the PSR1/PSR3 or they can be screwed to a seat glider. 1 set contains 2 side brackets to mount for 1 seat.The side brackets can also be used for any side mounted seat with the standard 290 mm spacing between the mounting holes.The hole spacing for mounting on a seat glider fits perfectly with PRO SIMRIG seat gliders.   Note: This product does not include fixtures and fittings for attachment to a sim rig. The PRO SIMRIG PSR1/PSR3 comes standard with fixtures and fittings. If you need jigs and fittings and do not have a PSR1/PSR3, please contact us.Only suitable for sim rigs.

Read more less

PRO SIMRIG Monitor Stand Single Monitor from 32.5", blackPRO SIMRIG monitor stands are built to stand separately from the rig. This stand is for a single monitor.Separate monitor stands (that are not connected to the rig) avoid vibrations coming from the rig. This is especially important when using a direct drive Wheelbase.The monitor stand is flexible and can be adjusted in height and width to suit your needs.For monitors from 32" monitors: (heavy version) recommendedVesa 100: including vesa 50/75/100 drill image plateVesa mounts included? YesScrews and nuts included? YesCan I upgrade to triple monitors at a later date? YesDoes your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this kit (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Check out the adjustable feet for monitor stands hereDIMENSIONSHeight: 1280mm (post + feet)Width: 1200mm (horizontal bar)With 40x80 horizontal bar and feetNo monitor included, picture is for illustration purposes only

Read more less

PRO SIMRIG Monitor VESA Mounting Bolt and Spacer KitThis kit is suitable for PRO SIMRIG VESA mounts and most common monitor setups.It is becoming more common for monitors to have a deep recess where the standard monitor mount sits. This looks great and makes for a nice flush finish, but it does mean that it can be difficult to fit aftermarket VESA mounts.With this kit, you can screw through the PRO SIMRIG VESA mounts, overcome most notches with the 8mm spacer, and bolt it to the back of the monitor.Kit includes:4 x M4 16mm screw4 x M4 8mm brass spacers1 Set required per Vesa mount/monitor (i.e. if you have a triple monitor stand, order 3 sets).*Please note: While we have found this combination to work well for most monitors we have dealt with, not every monitor is the same and different screws and spacers may be required to attach your monitor to the VESA mount. If you need help with this, please contact us.

Read more less

PRO SIMRIG mouse tray Mouse pad for mounting on the side mount of the PSR1 Rig.A complete kit for mounting the mousepad to the side mount is included. The tray is made of 4 mm thick aluminum and coated in black.Dimensions: 250 x 250 x 4 mmCompatibility: PRO SIMRIG PSR1 Suitable for mounting on other aluminum profile rigs.

Read more less

PRO SIMRIG Monitor Stand Triple Monitor, blackPRO SIMRIG monitor stands are built to stand independently of the simulation rig.The advantage of a free-standing monitor stand (not connected to the rig itself) is that it avoids the vibrations that come from steering wheel and pedal inputs. This can be especially noticeable when using a direct-drive wheelbase.Up to 32" monitors: Light version recommended (important note: Samsung G7 32" should use the Heavy version)32.5"+ monitors: Heavy version recommended Vesa 100: includes Vesa 50/75/100 drill pattern platesVesa mounts included? YesScrews and nuts included? YesDoes your monitor have a cutout on the back where the Vesa mounts are located? You may need mounting hardware for your monitor (to attach the monitor to the Vesa mount). Please buy this set (one per monitor). If you have any doubts, please contact us and we will be happy to help you.Do you have an uneven floor? Take a look at the adjustable feet for monitor stands hereDIMENSIONS Light: Height: 1240mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 500mm Has 40x40 horizontal bar, arms and feet Heavy: Height: 1280mm (uprights + feet) Width: 1200mm (horizontal bar) Arm length: 580mm Has 40x80 horizontal bar, arms and feet Note: The monitors are for illustration purposes only

Read more less

PRO SIMRIG double locking Seat Slider Double-locking seat glide from PRO SIMRIG.Fits perfectly with the 4 mm steel side seat brackets (PRO SIMRIG)Content includes:1 left rail1 right rail1 size-adjustable center barAssorted fixings:4 x M8x12mm4 x M8x16mm4 x M8x20mm4 x M8x25mm4 x M8 washers4 x M8 T-nuts4 x M8 lock nuts4 x M8 nut

Read more less

PRO SIMRIG PSR1 black baseThe PSR1 is designed to give you maximum flexibility as you develop your driving skills and experience new styles and demands in racing simulation.You can start with a base rig and purchase additional add-ons and accessories later.The highly customizable design of the PSR1 allows you to build the product to suit your individual needs.The PSR1 can be customized more or less in every way, both horizontally and vertically.The PSR1 rig consists of a base section, seat rails, a vertical section, a wheelbase section (wheelbase bracket not included) and a pedal section with adjustable pedal plate.All parts like angles, screws, nuts etc. are included.Various screws and nuts for mounting are included:Dimensions: Length: 1315mm Width: 660mm (outside of the wheel support brackets) Height: 820mm (top of the wheel holder supports) The PSR1 can be lowered with an additional upgrade kit.

Read more less

PRO SIMRIG heavy duty wheels set4 x 50mm red swivel castors + screw setNote: 2 wheels are lockable, 2 wheels are not lockable.Load capacity: 70kg per wheelHeight: 68mmWheel diameter: 50mmThese wheels offer an excellent aesthetic appearance. They are made of polyurethane, which offers excellent wear and abrasion resistance properties, high grip and resistance to many liquids and detergents, while having a high load capacity, as each caster wheel can support up to 70kg per wheel.Bolt set and T-nuts are included. Note that a Spherical head hex key may be required to obtain the proper angle to tighten the bolt from below.

Read more less